Desa RN30BT installation manual Inspecting Burner, Pilot Flame Pattern

Page 18

OPERATING HEATER

Non-Thermostat Models

Continued

INSPECTING BURNER

18

 

 

TO TURN OFF GAS TO APPLIANCE

 

 

 

 

 

 

 

Shutting Off Heater

1.

Turn control knob clockwise Clockwise to the PILOT position.

2.

Press in control knob and turn clockwise Clockwise to the OFF position.

3.

Turn off all electric power to the appliance if service is to be performed.

Shutting Off Burner Only (pilot stays lit)

1. Turn control knob clockwise Clockwise to the PILOT position.

MANUAL LIGHTING PROCEDURE

1.Remove front panel (see Figure 3, page 7).

2.Follow steps 1 through 5 under Lighting Instructions, pages 16 and 17.

3.With control knob pressed in, strike match. Hold match to pilot until pilot lights.

4.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

5.Replace front panel.

Check pilot flame pattern and burner flame pattern often.

PILOT FLAME PATTERN

Figure 18 shows a correct pilot flame pattern. Figure 19 shows an incorrect pilot flame pattern. The incorrect pilot flame is not touching the thermocouple. This will cause the thermocouple to cool. When the thermocouple cools, the heater will shut down.

Pilot Burner

Thermocouple

GOOD PILOT

GRH/OV 009

Figure 18 - Correct Pilot Flame Pattern

Pilot Burner

Thermocouple

BAD PILOT

GRH/OV 010

Figure 19 - Incorrect Pilot Flame Pattern

Page 17 Page 19
Image 18
Page 17 Page 19
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information Safety Information Piezo Ignition System Local Codes Unpacking Product FeaturesSafety Device Thermostatic Heat Control Thermostat Model OnlyInstallation Items Check GAS TypeLocating Heater Thermostat Sensing Bulb Locating Thermostat Sensing BulbAttaching Thermostat Sensing Bulb Removing Front Panel Of Heater Installing Heater to WallMounting Bracket Methods For Attaching Mounting Bracket To WallMarking Screw Locations Attaching Mounting Bracket To WallInstalling Bottom Mounting Screws Placing Heater On Mounting BracketConnecting to GAS Supply To GAS Supply ConnectingPressure Testing GAS Supply Piping System Checking GAS ConnectionsPressure Testing Heater GAS Connections Manual Shutoff ValveFor Your Safety Read Before Lighting Operating HeaterLighting Instructions Pilot Manual Lighting Procedure To Turn OFF GAS to ApplianceThermostat Control Operation Non-Thermostat Models GRH/OV 007G Inspecting Burner Pilot Flame PatternBurner Flame Pattern Correct Flame Pattern AT High PositionIncorrect Flame Pattern AT High Position ODS/PILOT and Burner Cleaning and Maintenance Trouble ShootingObserved Possible Problem Cause Remedy CabinetCleaning and Mainte TROUBLE- ShootingFrom Observed Possible Problem Cause Ing statement atTop Parts Under Warranty Technical ServiceService Hints Replacement Parts Parts Not Under WarrantyManual Shutoff Parts Centrals AccessoriesFAN KIT GA2100A Floor Mounting Stand GA4000Breakdown IllustratedParts ODS/PilotRN30B Parts List KEY Part Number Description QTYRN30BT RN30BT Parts List Illustrated CGN18B Parts List Warranty Information Limited Warranty VENT-FREE HeatersInternational

RN30BT specifications

The Desa RN30BT is a highly regarded heating solution known for its efficiency, versatility, and contemporary design. As a compact and stylish unit, it fits seamlessly into any modern living space while providing optimal warmth and comfort. The RN30BT is not just a heater; it’s an advanced appliance equipped with a range of features designed to enhance the user experience.

At the core of the Desa RN30BT is its innovative heating technology. It utilizes advanced infrared heating which warms objects and individuals in the room rather than merely heating the air. This makes it more energy-efficient, allowing users to enjoy a comfortable environment without excessive energy consumption. The infrared heating technology also ensures that the warmth is felt almost instantaneously, a feature that is particularly appreciated during cold months.

The RN30BT comes with a user-friendly digital control panel. This feature allows users to set and monitor the desired temperature with ease. Additionally, the integrated timer function provides the flexibility to schedule heating periods, enabling users to pre-warm their spaces before returning home. This enhances convenience while also promoting energy savings.

One of the standout characteristics of the Desa RN30BT is its portability. It is designed with lightweight materials and features durable wheels, making it easy to move from one room to another. This flexibility allows users to heat different areas of their homes as needed, catering to specific heating requirements throughout the day.

Safety is paramount in the design of the RN30BT. The heater includes a range of safety features such as overheat protection and a tip-over switch that automatically shuts off the unit if it is knocked over, providing peace of mind for households with children or pets.

In terms of aesthetics, the Desa RN30BT sports a sleek and modern design that complements various interior styles. Its contemporary appearance means that it can blend in seamlessly with home décor while providing effective heating performance.

Overall, the Desa RN30BT stands out as a highly functional and stylish heating solution. With its efficient infrared technology, user-friendly controls, portability, and robust safety features, it is an ideal choice for those seeking a reliable and effective way to keep their living spaces warm and inviting throughout the colder seasons.
Top Page Image Contents