Desa VTD-24N-JHB, VTD-18N-JHB Checking GAS Connections, Hearth Kit assembly and installation

Page 8

Installation

Continued

CHECKING GAS CONNECTIONS

WARNING: Test all gas piping

Equipment

Shutoff

Valve

Open

Closed

and connections, internal and external to unit, for leaks after installing or servicing. Correct all leaks at once.

WARNING: Never use an open flame to check for a leak. Apply a noncorrosive leak detec- tion fluid to all joints. Bubbles forming show a leak. Correct all leaks at once.

Pressure Testing Gas Supply Piping System

Test Pressures In Excess Of 1/2 PSIG

(3.5 kPa)

1. Disconnect log set with its individual equip- ment shutoff valve from gas supply piping system.

2. Cap off open end of gas pipe where equipment shutoff valve was connected.

3. Pressurize supply piping system by either us- ing compressed air or opening main gas valve located on or near gas meter.

4. Check all joints of gas supply piping system. Apply noncorrosive leak detection fluid to gas joints. Bubbles forming show a leak.

5. Correct all leaks at once.

6. Reconnect log set and equipment shutoff valve to gas supply. Check reconnected fittings for leaks.

Test Pressures Equal To or Less Than

1/2 PSIG (3.5 kPa)

1. Close equipment shutoff valve (see Figure 5).

2. Pressurize supply piping system by either us- ing compressed air or opening main gas valve located on or near gas meter.

3. Check all joints from gas meter to equip- ment shutoff valve (see Figure 6). Apply noncorrosive leak detection fluid to all joints. Bubbles forming show a leak.

4. Correct all leaks at once.

Figure 5 - Equipment Shutoff Valve

Equipment

Shutoff Valve

Gas Meter

Figure 6 - Checking Gas Joints

Hearth Kit assembly and installation

1.Determine which side the gas line will be coming into the fireplace.

NOTICE: Unit comes preassembled with gas inlet on right side. If your fireplace gas supply is on the left, gas inlet should be repositioned to left side of unit.

2.If gas supply line in your fireplace is on the right side, continue to step 3. If not, see Reposition- ing the Gas Inlet to the Left Side of Unit.

3.Install adapter fitting that comes with log set into fireplace gas supply pipe (see Figure 7). Seal using thread sealant.

Adapter

Fitting

Gas

Connector

Tube

Gas Inlet

Fitting

Figure 7 - Connecting Adapter to Gas

Supply

www.desatech.com114370-01D

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Approved Models VTD-18N-JHB Vtd-24n-jhb Vtd-30n-jhbTable of Contents Safety Information Local Codes UnpackingInstallation Flue Opening SpecificationsProduct Identification Check GAS TypeVenting Specifications for Installation Installing Damper ClampConnecting to GAS Supply Installation Items NeededTest Pressures Equal To or Less Than Psig 3.5 kPa Hearth Kit assembly and installationChecking GAS Connections Testing burner for leaks Repositioning Gas Inlet to Left Side UnitCleaning Maintenance For Your Safety Read Before LightingOperating Appliance Lighting InstructionsTroubleshooting Observed Problem Possible Cause RemedyGas leak. See Warning Statement at topService Hints Technical ServiceReplacement Parts AccessoriesIllustrated Parts Breakdown Models VTD-18N-JHB, VTD-24N-JHB and VTD-30N-JHBParts List Limited Warranty Vented GAS Logs Warranty InformationKeep this Warranty

VTD-18N-JHB, VTD-30N-JHB, VTD-24N-JHB specifications

Desa VTD-30N-JHB, VTD-18N-JHB, and VTD-24N-JHB are innovative heating solutions developed for effective space heating in residential and commercial environments. Each model is designed with specific features to cater to a variety of heating needs, ensuring optimal performance and energy efficiency.

The VTD-30N-JHB model stands out for its exceptional heating capacity, making it suitable for larger spaces. With a power output of 30,000 BTU, it is ideal for areas that require substantial warmth during colder months. This model incorporates advanced heating technology, which ensures faster warm-up times and greater airflow distribution. The user-friendly control panel allows for easy temperature adjustments, providing comfort at the touch of a button. Efficiencies in operation contribute to lower energy costs, making it a cost-effective solution for spacious applications.

In contrast, the VTD-18N-JHB offers a balanced performance for medium-sized environments. Its output of 18,000 BTU is sufficient for homes or offices where moderate heating is needed. This unit is equipped with a quiet operation feature, making it perfect for settings where noise reduction is crucial, such as bedrooms or quiet workplaces. Moreover, the VTD-18N-JHB comes with a programmable timer, allowing users to set specific heating schedules according to their daily routines, further enhancing energy savings.

The VTD-24N-JHB serves as a versatile option, bridging the gap between the other two models. With a power output of 24,000 BTU, it is an excellent choice for multi-purpose spaces that require adjustable heating solutions. Its built-in safety measures, such as an automatic shut-off feature and overheat protection, ensure safe operation under various conditions. The model is also designed to function effectively in diverse temperature settings, making it a reliable choice for fluctuating climates.

All three models boast high-quality construction, ensuring durability and longevity. They utilize advanced insulation technologies that minimize heat loss, contributing to their overall efficiency. Additionally, these units are designed with eco-friendly features that comply with modern environmental standards, making them a responsible choice for eco-conscious consumers.

In summary, the Desa VTD series, consisting of the VTD-30N-JHB, VTD-18N-JHB, and VTD-24N-JHB, offers a range of heating solutions tailored to different space requirements. With their combination of innovative technology, user-friendly controls, and eco-friendly design, these heaters provide efficient and effective alternatives for comfortable indoor climates.
Top Page Image Contents