Notes and cautions
Charging
Note
ffIf the battery overheats during charging, it may take longer to charge.
ffWhen automatic charging is not working, do the following:
––Turn the emergency switch (on the bottom of POWERbot) off and on again.
––Unplug the docking station's power plug and then plug it back on.
––Unplug the docking station, and then check whether there is any foreign matter on the charge pins and clean POWERbot and the charge pins of the docking station with a dry cloth or rag.
––Check for any obstacles such as reflective objects, chairs, etc. near the docking station.
ffIf POWERbot is left detached from the docking station, the battery will drain naturally.
––Try to keep POWERbot being charged on the docking station. (However, turn off the emergency switch and leave the docking station unplugged when planning to leave the house for long periods of time by going on a business trip or vacation, etc.)
Using
Note
ffThe POWERbot may get caught on thresholds, etc. during cleaning.
––To restart operation, shut off the emergency switch, move the POWERbot to an area where it can move easily, and then turn on the power again.
ffThe POWERbot cannot completely clean
areas it cannot enter, such as corners, between the wall and sofa, etc.
––Please use another cleaning tool to clean them regularly.
ffThe POWERbot cannot vacuum clumps of dirt, so some may remain on the floor after cleaning.
––Please use another cleaning tool to clean them regularly.
ffIf POWERbot is turned off, you cannot turn it on by pressing the Power button on the remote control. Press and hold the [Start/Stop] button on POWERbot.
ffYou cannot select and have the POWERbot execute Spot clean mode while it is charging.
ffIf you press Manual clean / Point cleaning button while charging, the POWERbot will be detached from the docking station and then turn into the standby mode.
Cleaning and maintenance
Note
ffIf you washed the dustbin and filter with water
––Dustbin: Completely wipe out the water.
––Filter: Completely dry it in the shade before using.
ffWhen cleaning the auto shutter tool, do not pull the auto shutter tool out too hard.
Caution
ffWatch your fingers when attaching or detaching the filter, since they may get stuck in the dustbin's intake.
ffTo avoid blockages by foreign matter, do not let the POWERbot vacuum up toothpicks, cotton swabs etc.
ffIf it is difficult to remove foreign matter from the brush, contact an authorized Samsung service center.