Samsung VR10M7020UW/TW, VR10M7030WG/ST, VR10M7020UW/ML manual ENGLISH-35

Page 35

Symptom

Checklist

I have installed the Samsung

 

Smart Home app, but,

ffYou can use the product after connecting the wireless router and

the POWERbot fails to be

the POWERbot through Easy-Setup according to the procedure.

connected.

 

 

 

I fail to log into the Samsung

ffCheck your ID and password on the screen of the Samsung

account.

account.

 

 

There appears a message

ffYou may have failed temporarily due to the distance from the

saying there is a failure

wireless router or other obstacles. Please try again after a while.

during Easy-Setup.

 

 

 

The products do not work

ffTurn off the Samsung Smart Home app and then run it again, or

even though the smart

disconnect the smart phone from the wireless router and then

connect it again. Or turn off the power supply of the POWERbot,

phone is normally connected

turn it on, wait for a minute or longer, and then run the Smart

to the POWERbot.

Home app again.

 

 

 

The functions of the

ffCheck if the Smart control blocking function of the POWERbot

Samsung Smart Home App

is set. (When the Smart control is locked, the Wi-Fi indicator is

do not work.

turned off.)

 

 

The Samsung Smart Robot

 

Vacuum App fails to get

ffCheck if the POWERbot is connected to the wireless router.

started.

 

 

 

POWERbot is not connected

ffCheck the setting status of the wireless router.

to Wi-Fi.

 

 

ffCheck whether the floor is not even and then the POWERbot works

Intelligent power control

with its body a bit lifted up.

function works on a normal

ffCheck whether there are any foreign matters on the cliff sensor

floor.

which is at the bottom of the POWERbot.

 

ffCheck whether the floor color is dark.

 

 

Intelligent power control

ffWhen the POWERbot cleans a carpet with short fibre and

function does not work.

bright color, it may recognize the carpet as a floor and then the

Intelligent power control function may not work.

 

 

 

 

ffWhen POWERbot cannot recognize the wall, the Edge clean master

 

may not work.

Edge clean master function

––When an obstacle made of reflective material is in front of the

does not work.

wall

 

––When the wall itself is made of reflective material

 

––When the wall is a dark color

 

 

Edge clean master function

ffCheck whether small obstacles are arranged in a narrow space.

works though there is no wall

ffWhen the POWERbot recognizes the front obstacle as a wall, Edge

or corner.

clean master function may work.

 

 

The Edge clean master

ffWhen the degree of the angle of a corner which the POWERbot

function works though

detects is large, the Edge clean master function may work without

the POWERbot has not

approaching the wall or corner.

approached a wall or corner.

 

 

 

ENGLISH-35

Image 35
Contents POWERbot Contents 03 Safety information Installation Safety Information Safety informationImportant Safety Instructions ENGLISH-05 ENGLISH-06 ENGLISH-07 Installation Installation note Smart Charging ChargingSR10M70 / SR2070 Series Check the installation status of the docking station whenManually charge the POWERbot when SR10M701 SeriesPress the button for more than 3 seconds Using POWERbotSelecting cleaning modes Repeat clean Auto clean Spot clean Manual cleanAbout the boundary markers Using the remote control Power / Recharging / Start/Stop Operating distance of the remote control Manual clean mode & Direction controlTop Name of each partSR20M70 series SR10M702 / SR10M703 seriesType, B Type Only Auto clean mode can be scheduled Setting time/scheduleENGLISH-22 Type, D Type Only Auto clean mode can be scheduledCancelling daily schedule Cleaning the dustbin Cleaning and maintainingCleaning the brush and Auto shutter tool Preparing the network Samsung Smart Home AppUsing the Samsung Smart Home app IOS AndroidUser menu screen Main screenCharging About the battery Information codes ENGLISH-33 Symptom Checklist TroubleshootingENGLISH-35 Open Source Announcement SR10M70 series SpecificationsMemo ENGLISH-39 Page คู่มือผู้ใช้ POWERbot26 แอป Samsung Smart Home 19 ชอของชื่ นสิ้วน่21 การต ั้งเวลา/กำหนดเวลา 24 การทำความสะอาดและการบำรุงรักษายหายี ข้อมูลเกี่ยวกับความปลอดภัสญลั ักษณ์ข้อควรระวำเตือนที่ใชัง/ค ้ แสดงว่ามีอันตรายที่อาจทำให้เสยชี วิตหรือบาดเจ็บร้ายแรงีเครื่องชาร์จแบตเตอรี่ / อุปกรณ์ชุดเชอมต่อื่ POWERbot้าตา ให ้ล ้า การทำความสะอาด เกี่ยวกับไฟฟ้ าในการใชงาน้ ก่อนการใชงาน้ข้อควรระว Fห ้ามใชPOWERbot บนโต๊ะหรือที่สูงการติดต ั้ง หรือ หมายเหตุในการติดต ั้งการชาร์จแบบสมาร์ท การชาร์จขั้นตอนที่ต้องดำเนินการถ้าไม่มีการชาร์จ การชาร์จอัตโนมัติ การชาร์จใหม่แบตเตอรี่ใกล้หมด Lo กดปุ่ ม ค้างไว้เป็ นเวลามากกว่า 3 วินาที การใช้POWERbotการเลือกโหมดการทำความสะอาด อัตโนมัติ เฉพาะจุด ด้วยตนเอง การใช POWERbotการใชฟังก์ชนการทำความสะอาดพิเศษ ทำความสะอาดเกี่ยวกับเครื่องหมายขอบเขต การใชรีโมทคอนโทรล้ ทำความสะอาด เปิด/ปิดเครื่องการชาร์จใหม่ เริ่ม/หยุดการใสแบตเตอรี่ เคลื่อนไปข้างหน้า หันซาย้ หันขวาจอแสดงผล ชอของชื่ นสิ้วน่ด้านบน ด้านล่างSR10M702 / SR10M703 ซรี่ส์ SR20M70 ซรี่ส์การยกเลิกระหว่างการตั้งค่า การต ั้งเวลา/กำหนดเวลาการตั้งเวลา การกำหนดเวลาไทย-22 เมื่อมีการกำหนดเวลารายวันไว้ การยกเลิกการกำหนดเวลารายวันเครื่องจนได้ยินเสยงคลิกี การทำความสะอาดที่เก็บฝุ่ นการทำความสะอาดเซนเซอร์และกล้อง ประกอบที่เก็บฝุ่ นกลับเข้าใสที่เก็บฝุ่ นเข้าที่ในตัประกอบแปรงกลับเข้าที่ ประกอบฝาปิดแปรงกลับ อัตโนมัติ ัตโนมัติการทำความสะอาดล้อขับเคลื่อน ทำความสะอาดแปรงการต ั้งค่าเราเตอร์ไร้สาย แอป Samsung Smart Homeการเตรียมเครือข่าย การสร้างบัญชีSamsung การใชแอปพลิเคช้ นั Samsung Smart HomeIOS การลงทะเบียนผลิตภัณฑ์ Easy-Setupการดาวน์โหลดแอป Samsung Smart Home AndroidChat control การควบคุม POWERbotหน้าจอหลัก หน้าจอเมนูของผู้ใชการใชงาน้ หมายเหตุและข้อควรระวังการชาร์จ ที่แคบๆ หรืออยู่ในบริเวณใกล ้กัน เกี่ยวกับแบตเตอรี่ เกี่ยวกับเซนเซอร์ IrDAรหัสข้อมูล ปรากฏรหัสข้อมูล ปิดสวิตชฉุกเฉิน์ แล้ว พร้อมกับการเตือน SR10M702, SR10M703, SR20M70 ซรี่ส์แนวทแยงโดยกะทันหัน การแก้ไขปัญหากำลังดูดน้อย Wi-Fi ระหว่าง Easy-Setupกับ POWERbot ตามปกติ Vacuum ไม่สามารถเริ่มต้น POWERbot ไม่ได้เชอมต่อกับื่คำแถลงโอเพนซอร์ส SR10M70 ซรี่ส์ ข้อมูลจำเพาะบันทึก ไทย-39 Page Hướng dẫn sử dụng Ứng dụng Samsung Smart Home Tên của mỗi bộ phậnThiết lập thời gian/lịch trình Vệ sinh và bảo trìThông TIN AN Toàn Thông tin an toànBộ sạc pin / Đế sạc Cảnh BÁO để giảm nguy cơ cháy, điện giật hoặc bị thươngTiếng VIỆT-05 Cảnh BÁO Vệ sinh và bảo trì Cảnh BÁO Nguồn điện có liên quanCảnh BÁO Trongdụng khi sử Cảnh BÁO Trướcdụng khi sửCẨN Trọng Trongdụng khi sử CẨN Trọng Vệtrì sinh và bảoBên có nhãn dán phải nằm Lắp đặtĐế sạc phải được cắm vào nguồn điện và luôn được bật 1đế sạcĐế sạc Dây nguồn Bộ sạc pin Các thanh chắn Tùy Lưu ý về lắp đặtHoặc Bộ điều khiển từ xa Pin loại AAA Hướng dẫn sử dụng Bộ lọc dự phòngSạc thông minh Sạc pin1Bật công tắc khẩn cấp ở phía dưới Các bước cần thực hiện nếu việc tự sạc lại không xảy ra Sạc lạiPin yếu Lo Nhấn nút lâu hơn 3 giây Sử dụng POWERbotCách chọn SR10M702 SR10M703 SR10M701 SR20M70 Lựa chọn chế độ vệ sinhBiểu tượng được hiển thị Phương pháp vệ sinh cho mỗi chế độ Sử dụng chức năng vệ sinh đặc biệtVề thanh chắn Sử dụng bộ điều khiển từ xa Chọn để vệ sinh với lực hút vừa phải Chọn để bật hoặc tắt chức năng Wi-FiĐộng Chọn để vệ sinh với lực hút mạnh nhấtLắp pin Trong khi POWERbot đang trong quá trình vệ sinhMàn hình hiển thị Tên của mỗi bộ phậnPhần mặt trên Phần mặt dướiDòng SR10M702 / SR10M703 Dòng SR20M70Hủy trong khi đang cài đặt Hủy Lịch trình một lần/hàng ngày Thiết lập thời gian/lịch trìnhThiết lập thời gian Thiết lập lịch trìnhLần/hàng ngày được Thiết lập Thiết lập hoàn tấtKhi cả Lịch trình một Hoặc Khi lịch trình hàng ngày đã được thiết lập Hủy lịch trình hàng ngàyLau nhẹ với vải mềm. Không dùng nước hoặc dung dịch tẩy rửa Bạn phải tắt công tắc khẩn cấp trước khi vệ sinh POWERbotVệ sinh và bảo trì Vệ sinh cảm biến và cameraThiết kế của chổi quét có thể khác biệt tùy theo mẫu Vệ sinh chổi quét và công cụ Cửa chớp tự độngVệ sinh bánh xe dẫn hướng Chớp tự độngThiết lập bộ định tuyến không dây Ứng dụng Samsung Smart HomeChuẩn bị mạng Tạo tài khoản Samsung Sử dụng ứng dụng Samsung Smart HomeĐăng ký sản phẩm Thiết lập dễ dàng Tải ứng dụng Samsung Smart HomeMàn hình menu người dùng Điều khiển POWERbotMàn hình chính Vệ sinh và bảo trì Lưu ý và cẩn trọngSạc pin Sử dụngGiới thiệu về cảm biến IrDA Thông tin về pinMã thông tin Mã thông tin Tình trạng Danh mục cần kiểm tra Xử lý sự cốTình trạng Thông báo nguồn mở Phân loại Mục Thông tin chi tiết Thông số kỹ thuậtDòng SR10M70 SR10M701 SR10M702 SR10M703Ghi chu Tiếng VIỆT-39 DJ68-00763H-02
Related manuals
Manual 120 pages 37.55 Kb Manual 120 pages 63.53 Kb Manual 120 pages 30.02 Kb

VR10M7020UW/TW, VR10M7030WG/ST, VR10M7020UW/ML specifications

The Samsung VR10M7020UW/ML, VR10M7030WG/ST, and VR10M7020UW/TW stand as advanced smart robot vacuum cleaners that combine cutting-edge technology with user-friendly features to revolutionize home cleaning. These models are equipped with Samsung's proprietary smart navigation and cleaning technologies, ensuring efficient coverage and thorough cleaning of various floor types.

A standout feature of these vacuum cleaners is the Visionary Mapping Plus technology, which enables them to create an optimized cleaning path by mapping out the layout of your home. This feature allows the vacuum to remember the configuration of different rooms, avoiding obstacles and preventing repeated coverage of the same areas. This intelligent navigation helps maximize cleaning efficiency, making it a reliable choice for busy households.

Another significant aspect is the powerful suction capability, which is designed to tackle both fine dust and larger debris. The suction power adjusts automatically based on the type of flooring detected, ensuring a deep and thorough clean without manual intervention. The Cyclone Force technology helps maintain consistent suction performance over time, preventing filter clogging and enhancing durability.

The Samsung VR series also integrates Smart Control features, allowing users to monitor and control the vacuum cleaner through a smartphone app. This connectivity enables scheduling, real-time tracking, and maintenance alerts directly from your device, adding convenience and flexibility to your cleaning routines. Additionally, voice assistant compatibility enhances user experience, making it easy to operate the vacuum through simple voice commands.

These models also prioritize user-friendly maintenance. They come equipped with an easy-to-empty dustbin, and the high-efficiency filter system captures allergens and fine particles, promoting a healthier living environment.

In terms of design, the Samsung VR10M7020UW/ML, VR10M7030WG/ST, and VR10M7020UW/TW boast a sleek, modern aesthetic, suitable for various home decors while being compact enough to maneuver easily under furniture. With a strong battery life, these vacuums can clean for extended periods before requiring a recharge, making them capable of handling larger cleaning tasks in one go.

Overall, the Samsung VR series exemplifies innovation in the realm of home automation, offering powerful performance, intelligent navigation, and convenient controls that cater to the evolving needs of modern lifestyles.