
Setting Up Anynet+
Press the [TOOLS] button to display the Tools menu. You can also display the <Anynet+> menu by selecting <Tools>→<Anynet+
Setup
MENU | DESCRIPTION |
|
|
Anynet+ | To use the <Anynet+> Function, <Anynet+ |
| When the <Anynet+ |
| are deactivated. |
|
|
Auto Turn Off | Setting an <Anynet+> Device to turn Off automatically when the product is turned off. |
| The active source on the product remote must be set to product to use the <Anynet+> function. |
| If you set Auto Turn Off to Yes, connected external devices are also turned off when the product |
| is turned off. If an external device is still recording, it may or may not turn off. |
|
|
Searching Connec- | The message <Configuring Anynet+ Connection...> is displayed. |
tions | When searching devices completes, the connected devices are listed in the Anynet+ menu. |
| |
|
|
Using the Product |