Operating the cleaner
SPECIAL ON-BOARD TOOLS
Your vacuum is not only a powerful carpet and rug cleaner, it’s also a versatile above
floor vacuum cleaner when you select one of the special tools. 1. Raise Handle to Upright Position.
2. Grasp the end of the Hose Wand and lift Hose Wand to separate from the Hose Wand Base.
3. Attach tools by fi rmly pushing onto Vacuum Hose or Extension Wand.
02
Combination Dusting Brush/
Upholstery Tool:
Two Types of cleaning tools are included in one attachment : rotate for desired tool.
•Use Brush side to dust furniture, blinds, books, lamps, shelves, and baseboards.
•Use Upholstery side for curtains, draperies, cushions, fabrics.
Crevice Tool:
Use in tight narrow spaces.
Quick Release |
|
Cord Wrap | Crevice Tool |
|
Power Cord 
Extension
Wand
Combination
Dusting Brush/
Upholstery Tool
Hose Wand
OPERATING THE CLEANER
Extension Wand: | Hose Wand |
Use with desired attachment for a longer | Base |
| |
reach. |
|
Mini Turbo Brush (Select Models):
Use rotating brush action for small areas such as stairs and upholstery.
*option
Select Models Only
Note : Press gently when using Mini Turbo Brush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating.
POWER CORD STORAGE
1.To use your vacuum, remove the cord and plug it into an electrical outlet. For your convenience, there is a quick release cord wrap for easy cord removal.
2.When you are fi nished cleaning, turn vacuum cleaner off.
3.Unplug power cord by grasping the polarized plug (NOT the cord) and disconnect from outlet.
4.Loop power cord around cord wraps on the back of the vacuum as shown.
5.Clip molded plug to power cord to secure.
operating the cleaner _09