Samsung NV70K1340BS/ML, NV70K1340BW/ML manual Troubleshooting, Replacement, Checkpoints

Replacement

Bulbs

1. Remove the glass cap by turning anti- clockwise.

2.Replace the oven light.

3.Clean the glass cap.

4. When done, follow step 1 above in the reverse order to reinsert the glass cap.

WARNING

•Before replacing a bulb, turn off the oven and unplug the power cord.

•Use only 25-40 W/220-240 V, 300 °C heat-resistant bulbs. You can purchase approved bulbs at a local Samsung service center.

•Always use a dry cloth when handling a halogen bulb. This is to prevent the bulb from being tampered with fingerprints or sweat, resulting in a shortened lifecycle.

Troubleshooting

Checkpoints

If you encounter a problem with the oven, first check the table below and try the suggestions. If the problem continues, contact a local Samsung service centre.

Problem	Cause	Action
The buttons	• If there is foreign matter	• Remove the foreign
cannot be pressed	caught between the	matter and try again.
properly.	buttons
	• Touch model: if there is	• Remove the moisture and
	moisture on the exterior	try again.
	• If the lock function is set	• Check whether the lock
		function is set.
The time is not	• If there is no power	• Check whether there is
displayed.	supplied	power supplied.
The oven does not	• If there is no power	• Check whether there is
work.	supplied	power supplied.
The oven stops	• If it is unplugged from the	• Reconnect the power.
while in operation.	power socket
The power turns off	• If continuous cooking	• After cooking for a long
during operation.	takes a long time	time, let the oven cool.
	• If the cooling fan does not	• Listen for the sound of the
	work	cooling fan.
	• If the oven is installed	• Keep the gaps specified
	in a place without good	in the product installation
	ventilation	guide.
	• When using several power	• Use a single plug.
	plugs in the same socket
There is no power	• If there is no power	• Check whether there is
to the oven.	supplied	power supplied.
The oven exterior	• If the oven is installed	• Keep the gaps specified
is too hot during	in a place without good	in the product installation
operation.	ventilation	guide.

English  21

Troubleshooting

NV70K1340BSML_DG68-00879A-01_EN.indd 21

4/5/2017 4:56:49 PM