C. Frame the Heater
Figure 3.2 shows a typical framing (using 2 x 4 lumber) of the heater, assuming combustible materials are used. All re- quired clearances to combustibles around the heater must be adhered to.
NOTE: The height that a combustible mantel is fitted above the heater is dependent on the height of the front selected. The minimum height is 1 in. (25 mm) above the front. Fronts are available in 24 in. (610 mm), 28 in. (711 mm) and 32 in. (813 mm) high.
22-7/8 in.
(581 mm)
(header height)
(673 mm)
(248 mm)
Figure 3.2 Framing the Heater
8 |