
1.If you open the drawer ( 1 ), you can see the lower hinge ( 2 ).
2.Insert the supplied hex wrench ( 3 ) into the shaft ( 4 ) of the lower hinge.
3.Please adjust the height turning the hex wrench ( 3 ) clockwise(
) or
counter-clockwise(
).
2
3 4
1
3
When you turn the hex wrench counter-clockwise( ), the door will move up.
4.After adjusting the doors, please insert the supplied ![]()
Two
The thickness of each
ADJUSTING ThE FREEZER DRAWER lEVEl
Adjustment part
![]()

Freezer Drawer
1.Locate the
Unscrew the four Phillips screws ( 2 ) slightly to loosen the door.
2.Loosen the controller screw( 3 ) with a Phillips screwdriver.
3
1 2
12_Setting Up