Setting up your French Door Refrigerator
2. Disconnect the electrical connector |
| |
( 3 ) above the upper right |
| 4 |
door hinge and the 3 electrical |
| |
connectors ( 4 ) above the upper left |
| |
door hinge. | 5 ) by |
|
Disconnect the water tube ( | 3 | |
pulling the tube fitting ( 6 ) apart as |
| |
shown in the picture. |
|
|
5 |
| 6 |
3. Remove the 3 hex head |
| 8 |
bolts( 7 ) found attached to |
| 7 |
the upper left and right door |
| |
hinges with a Wrench(10mm). |
| |
With a Philips head | 9 |
|
screwdriver, remove the |
|
|
ground screw( 8 ) found |
|
|
attached to the upper left and right door hinges. Remove the upper left and right door hinges( 9 ).
4.Lift the door straight up to remove.
5.With a Philips head screwdriver,
remove the 2 screws (10) attached to | 12 | |
the lower left and right door hinges. | ||
With a Wrench(10mm), remove the | 10 | |
11 | ||
2 hex head bolts (11) attached to the | ||
lower left and right door hinges. |
| |
Remove the lower left and right door |
| |
hinges(12). |
|
•Be careful not to missplace the hinge cap because it can be easily taken off.
01SETTING UP
Setting Up_9