Safety Information
ADDITIONAl TIPS FOR PROPER USAGE
a)Allow the appliance to stand for 2hours after installation.
b)To get Best performance of product,
1)Do not place foods too closely in front of the vents at the rear of the appliance as it can obstruct free air circulation in the freezer compartment.
2)Wrap the food up properly or place it in airtight containers before put it into the fridge freezer
3)Do not put any newly introduced food for freezing near to already frozen food.
c)Do not place carbonated or fizzy drinks in the freezer compartment
d)Please observe maximum storage times and expiry dates of frozen goods.
e)There is no need to disconnect the refrigerator from the power supply if you will be away for less than three weeks. But, Remove all the food if you are going away for the three weeks or more. Unplug the refrigerator and clean it, rinse and dry
f)Most power failures that are corrected in an hour or two will not affect your refrigerator temperatures. However, you should minimize the number of door openings while the power is off. But should the power failure last more than 24hours, remove all frozen food.
g)If the key is provided with refrigerator, the keys should be kept out of the reach of children and not in the vicinity of the appliance.
h)The appliance might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the lower end of the range of temperatures for which the refrigerator was designed to operate in.
i)Do not store food which goes bad easily at low temperature, such as bananas, melons.
j)Your appliance is frost free, which means there is no need to manually defrost your appliance, as this will be carried out automatically.
k)Any increase in temperature of frozen food during defrosting can shorten its storage life.
l)Defrost cycle may be changed according to the number of door opening times and ambienttemperature.
WARNING SIGNS FOR DISPOSAl
Cyclopentane used as a insulation blowing gas. The gases in the insulation material require special disposal procedures. Please contact your local authorities in regard to the enviromentally safe disposal of this product. Ensure that the piping at the rear of the product is not damaged. The gas in the system must not be released to the atmosphere.
6_Safety Information