Samsung RF26NBUS1/SML Getting Ready to INSTAll ThE Refrigerator, Removing ThE Refrigerator Doors

GETTING READY TO INSTAll ThE REFRIGERATOR

Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art features and efficiencies that this new appliance offers.

Selecting the best location for the Refrigerator

•A Location with easy access to the water supply.

•A Location without direct exposure to sunlight.

•A Location with level (or nearly level) flooring.

•A Location with enough space for the

Refrigerator doors to open easily.

•Allow sufficient space for air circulation of the internal cooling system.

If the Refrigerator does not have enough space, the internal cooling system may not work properly.

50mm

￿5mm￿5mm

￿￿￿ ￿￿ ￿50mm

￿￿￿￿mm

￿￿￿0mm

•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.

•Do not install the Refrigerator where the temperature will go below 10 ºC(50 ºF).

When moving your refrigerator

To prevent floor damage be sure the front levelling legs are in ther up position

(above the floor). Refer to ‘Levelling the refrigerator’ in the manual (at page 11).

To protect the finish of the flooring, place the protection sheet such as packing carton under the refrigerator.

When installing, servicing or cleaning behind the refrigerator, be sure to pull CAUTION the unit straight out and push back in straight after finishing.

REMOVING ThE REFRIGERATOR DOORS

If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.

REMOVING ThE REFRIGERATOR DOORS

Philips head	Wrench(10mm)	Flat head	Pliers
screwdriver		screwdriver

DISASSEMblE ThE REFRIGERATOR DOORS

1.With the door opened, remove the Top Table cap ( 1 ) with a Flat head screwdriver, and close the door. Remove the 3 screws holding down the Top Table and remove the Top Table( 2 ).

2

1

8_Setting Up