setting up your freezer
GETTING READY TO INSTALL THE FREEZER
Congratulations on your purchase of this Samsung Freezer. We hope you enjoy the
•This freezer must be properly installed and located in accordance with the manual before it is used.
•Use this appliance only for its intended purpose as described in this instruction manual.
•We strongly recommend that any servicing be performed by a qualifi ed individual.
•Please dispose of the packaging material for this product in an environmentally friendly manner.
Pull the power plug out of the socket before WARNING changing the interior light of the freezer.
-Otherwise, there is a risk of electric shock.
Selecting the best location for the Freezer
•A location without direct exposure to sunlight.
•A location with fl at fl oor surface.
•A location with enough space for the freezer door to open easily.
•Allow suffi cient space for air circulation of the internal cooling system. If the freezer does not have enough space, the internal cooling system may perform more.
NN
NN
PS
NN
NN
• Height of the product may be different depending on the models.
•Allow clearance to the right, left, back and top when installing. This will help reduce power consumption and keep your energy bills lower.
•Do not install the freezer in a place with the temperature lower than 10°C.
Pull the unit straight out when installing, CAUTION servicing or cleaning behind the freezer and
push it straight back after work is complete. Make sure your fl oor can support fully loaded freezer.
REVERSING THE FREEZER DOOR
Samsung recommends that reversing of the WARNING door opening is only completed by Samsung approved Service providers. This will be on a
chargeable basis and at the customers expense.
Any damage caused while attempting to reverse the door opening is not covered under the appliance manufactures warranty. Any repairs requested due to this circumstance will be completed on a chargeable basis at the customers expense.
Required Tools (Not provided)
Phillips Head | Flat Head | 10mm | |
Socket Wrench | |||
Driver (+) | Driver | ||
(for bolts) | |||
|
|
8mm |
| 4mm Hex | |
Spanner | Wrench | ||
Socket Wrench | |||
(for hinge shaft) | (for bottom | ||
(for bolts) |
| hinge shaft) | |
|
|
1.Remove 2 screws on the top of the freezer.
Screws