Samsung DV70H4400CW/KJ, DV80H4100CW/KJ Installation Side by Side, Final Installation Checklist

INSTALLATION SIDE BY SIDE

For proper installation, we recommend that you hire a professional. To install:

1.Move your dryer to an appropriate location for installation. Consider

	installing the dryer and washer side-by-side. Lay two of the carton	Level
	cushion-tops on the floor. Tip your dryer on its side so it will lay across
	both cushion-tops.
2.	Set your dryer back in an upright position.
3.	To ensure that the dryer provides optimal drying performance, it must
	be level. To minimize vibration, noise, and unwanted movement,the
	floor must be a perfectly level, solid surface.

To set the dryer to the same height as the washer, fully retract the levelling feet by turning them counterclockwise, then loosen the legs by turning them clockwise.

Levelling feet

Retract fully Then loosen

Adjust the levelling feet only as much as necessary to level the dryer. Extending the levelling feet more than necessary can cause the dryer to vibrate.

4.Review Electrical Requirements section (See page 12).

BEFORE OPERATING OR TESTING.

5.With a level, check your dryer and make necessary adjustments to the levelling legs.

6.Plug in your dryer, and check operation by using the checklist below.

FINAL INSTALLATION CHECKLIST

Dryer is plugged into electrical outlet and is properly grounded.

Dryer is leveled and is sitting firmly on the floor.

Start your dryer to confirm that it runs, heats, and shuts off.

INSTALLING YOUR DRYER

English - 13