Samsung DV70H4400CW/KJ, DV80H4100CW/KJ Connected firmly, Connect the end of the hose to the tap

Connecting the drain hose

The end of the drain hose can be positioned in three ways:

1.Over the edge of a wash basin: The drain hose must be placed lower than 90 cm. If the end of the drain hose needs to be placed above the ground, we recommend a height of 60 cm ~ 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving.

Drain hose

90 cm

Hose guide

Cable Tie

2.Assemble the drain hose and the hose guide and fix them with the cable-tie.

3.You can drain the condensed water by connecting the accessory hose (long drain hose) to the drain-outlet directly.

Connecting the direct-hose

You can immediately drain the condensed water that comes out while drying, by connecting the drain hose to the tap.

1.Assemble the hose connector and the hose.

Since there is a danger of water leaking from the hose
CAUTION connecter and accessory hose, make sure that they are	Hose Connecter
connected firmly.

2.Connect the end of the hose to the tap.

INSTALLING YOUR DRYER

English - 15