Samsung RFG28MEPN1/SML manual Press the Alarm/hold 3 sec for Filter Reset

The Filter light turns red to let you know when it is time to change your water

fi lter cartridge.

To give you time to get a new fi lter,
the red light comes on just before the	(Red)
capacity of the current fi lter runs out.

Changing the fi lter on time provides

you with the freshest, cleanest water from your refrigerator.

1.Shut off the water supply. Then, turn the water filter ( 1 ) about 1/4 turn, counter-clockwise.

2.Pull the water filter ( 1 ) from the case filter ( 2 ).

2

1

• To change the water filter more easily, shut off the water supply valve.

•Sometimes, it is hard to disassemble the water filter because impurities in the water cause it to stick. If you are having difficulties, grip the water filter firmly and pull it hard.

•When you pull the water filter, a little water can leak from the opening. This is normal. To minimize the water leaks, keep the filter cartridge horizontal when you pull it.

•To prevent overflow, empty the water tray filter ( 3 ) and dry around of case filter ( 2 ).

3.Insert the new filter into the filter case ( 4 )

4.Push the filter, and then turn it clockwise until it locks.

2

3

• If you are in trouble of inserting the water filter as high pressure of water, shut off the water supply valve.

•The locked symbol should be lined up with the indicator line.

4

5. press the “Alarm/hold 3 sec for Filter Reset”

button ( (Filter Reset) ) for about 3 seconds to reset the water filter. The color of indicator ( ) changes from red to light off.

6.If you turned off the water supply, turn it back on.

For a replacement water fi lter, you can visit your local home Improvement center or contact the Samsung Parts distributor.

Be sure the replacement water fi lter has the SAMSUNG logo on the box and on the water fi lter.

20_ operating

DA99-03404F-12.indb 20 2015. 5. 7. ￿￿ 8:09