INSTALLATION OF THE REFRIGERATOR
Checking the Dimensions of your Entrance Door
| • Check the dimensions of your entrance door to determine whether the refrigerator can |
NOTE | pass through it. |
•When refrigerator passes in door and depth or width of refrigerator is bigger, removes refrigerator doors.
Selecting the Location for the Refrigerator
•Select a location with easy access to the water supply.
•Select a location with enough space for the refrigerator.
•Select a location without direct exposure to sunlight.
•Select a location with level floor or close to it.
| • Before disassembling the freezer door, the water supply line needs to be disconnected. | |
NOTE | (If not, the water supply line can be damaged.) | |
• See “Separating the water supply line from the refrigerator” on the next page. | ||
|
Allow sufficient space to install the refrigerator on a flat surface.
• When the refrigerator does not have enough space, the internal cooling system may not work correctly.
10
5
1
B
A
| A (cm) | B (cm) |
RSC6 | 161.7 | 181.1 |
RSC4 | 161.7 | 131.1 |
NOTE
CAUTION
Allow clearance to the right, left, back and top when installing the refrigerator. This has the advantage of reducing power consumption.
Do not install the refrigerator where the temperature will go below 10°C.
When installing, servicing or cleaning behind the refrigerator, be sure to pull the unit straight out and push back in straight after finishing.
18