![](/images/new-backgrounds/1235144/23514421x1.webp)
ConTroLLing THE TEMPErATurE(sEMi ELECTroniC ConTroL)
CONTROLLING THE FREEZER TEMPERATURE
The freezer temperature can be set between
temperature is shown in the temperature display. Keep in mind that foods like ice
cream may melt at
The temperature display will move sequentially from
Five seconds after the new temperature is set the display will again show the
actual current freezer temperature. However, this number will change as the Freezer adjusts to the new temperature.
FREEZER TEMPERATURE CONTROL
COLD COLDER
COLDEST
ingATr PEo 02
6°F 3°F 0°F
CONTROLLING THE FRIDGE TEMPERATURE
The refrigerator temperature can be set between 7°C and 1°C to suit your particular need.
Turn the Fridge lever clockwise or counter clockwise until |
|
| |
the desired temperature is shown in the cover damper. |
|
| |
When storing large quantities of food to be refrigerated or |
|
| |
temperature is not cold enough, Adjust the temperature |
|
| |
control to the "COLDER" position. |
|
| |
When using MID range, adjust the temperature control to |
|
| |
the halfway position between COLDER and COLD. |
|
| |
When the food refrigerated is frozen, or there is a small |
|
| |
quantity of food, adjust the temperature control to the |
|
| |
COLD position. |
| You must empty the | |
If you are going on a long vacation or business trip or you |
| ||
CAUTION | refrigerator before | ||
do not need to use the refrigerator, adjust the temperature | |||
| adjusting the Vacation | ||
control to the“VACATION”position. The refrigerator is |
| ||
| position. | ||
switched off but the freezer remains on. |
| ||
|
|
The temperature of the freezer or the refrigerator may rise from opening the doors too frequently, or if a large amount of warm or hot food is placed in either side. This may cause the digital display to blink. Once the freezer and refrigerator return to their normal set temperatures the blinking will stop. If the blinking continues, you may need to “reset” the refrigerator. Try unplugging the appliance, wait about 10 minutes and then plug back in.
operating _11
2011.6.8 1:55:1 | PM | |
|
|
|