Samsung MX-C830D/XER manual Connections, Connecting the Speakers, Connecting the LED cables

Connections

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

		FRONT
		LED
		SPEAKERS OUT
		(IMPEDANCE3Ω)
Speaker (R)	R	L	Speaker (L)

Position of the product

Place it on a stand or cabinet shelf, or under the TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV. Example : For 32" TV's 6.56 ~ 7.87 feet (2~2.4 m)

For 55" TV's 11.5 ~ 13.1 feet (3.5~4 m)

	Place these speakers in front of
Front Speakers	your listening position, facing
	inwards (about 45°) toward you.
ei	Place the speakers so that their
	tweeters will be at the same
	height as your ear.

!!CAUTION

`` Do not let children play with or near the speakers. They could get hurt if the speaker falls.

`` When connecting the speaker wires to the speakers, make sure that the polarity (+/–­) is

correct.

✎✎NOTE

`` If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set.

Connecting the LED cables

Connect the LED cables of the Front Speakers to each LED Terminals of the system.

`` You can enjoy the special light effect on your speakers.

Speaker	FRONT
	LED
	Speaker
	SPEAKERS OUT
	(IMPEDANCE3Ω)
R	L

※Use the cable tie on the rear panel so that the LED cables are not loose.

1.Place the LED cables on the cable tie of the rear panel.

2.Press the cap on the cable tie to reveal the hole.

SPEAKERS OUT (IMPEDANCE3Ω)

R L

Rear panel

Cable tie

3.Bend the end of the cable tie and put it into the hole to tighten up.

12 English