Setting the Clock
For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
1.Switch the system on by pressing the
STANDBY/ON ( 
) button.
2.Press and hold TIMER/CLOCK button and then press the ENTER button.
Result: "CLOCK" is displayed.
3.Press ENTER.
Result: The hour flashes. `` Decrease the hours: _ `` Increase the hours: +
4.When the correct hour is displayed, press
ENTER.
Result: The minutes flashes.
`` Decrease the minutes: _
`` Increase the minutes: +
5.When the correct hour is displayed, press
ENTER.
Result: "TIMER" appears in the display.
`` The current time is now set.
✎✎NOTE
`` You can display the time, even when you are using another function, by pressing and hold the TIMER/CLOCK button once.
`` You can also use [ or ] on the front panel instead of buttons in step 3,4.
Timer Function
The timer enables you to switch the system on or off at specific times automatically.
`` Before setting the timer, check that the current time is correct.
`` For each step, you have a few seconds to set the required options. If you exceed this time, you must start again.
`` If you no longer want the system to be switched on or off automatically, you must cancel the timer.
Example: You wish to wake up to music every morning.
1.Switch the system on by pressing the
STANDBY/ON ( 
) button.
2.Press and hold the TIMER/CLOCK button and then press _ or + buttons until TIMER is displayed.
3.Press the ENTER ( 
) button.
Result: ON TIME is displayed for a few seconds, followed by any
444Set the timer switch-on time.
aPress the _ or + button.
bPress the ENTER ( 
) button. Result: The minutes flash.
cPress the _ or + button.
dPress the ENTER ( 
) button.
Result: OFF TIME is displayed for a few seconds, followed by any
555Set the timer
b Press the ENTER ( 
) button.
Result: The minutes flash.
cPress the _ or + button.
dPress the ENTER ( 
) button.
Result: VOL XX is displayed, where XX corresponds to the volume already set.
666Press _ or + button to adjust the volume level and press the ENTER ( 
) button.
Result: The source to be selected is displayed.
777Press the _ or + button to select the desired source to be played when the system switches on.
`` FM (radio) : a Press the ENTER ( 
) button. b Select a preset station by press
the _ or + button.
`` DVD/CD (compact disc): Load one or more compact discs.
`` TAPE(cassette): insert a cassette tape.
`` USB: Connect the USB device.
04 Basic Functions