Hasselblad 70380534, 70380554 Setting Camera model and options, Shutter Delay, Exposure Time

H4D

12

34

56

78

9

Setting CAMERA model and options

These settings are only available when the sensor unit is not ­attached to an H4D body.

Proceed as follows:

1.Press the menu (MENU) button to open the menu.

2.Use  and  to select the SETTINGS sub-menu.

3.Press  to open the SETTINGS menu.

4.Use  and  to select CAMERA.

5.Press  to open the CAMERA menu.

6.Press either the + or – button to select camera model.

7.Use  and  to select EXPOSURE TIME or CAPTURE SEQ. if required.

8.Press either the + or – button to make new settings if required.

9.Press the menu (EXIT) button to exit the menu system and keep the settings.

Options available for PINHOLE and FLASH SYNC

Shutter Delay

The normal setting is Default and cannot be changed.

Exposure Time

This setting should be changed for cable-free exposure times ­longer than 1/8 second, ensuring that it matches the shutter speed/exposure time on the camera/lens. The settings range from 1/8 second to 32 seconds (1/8 second is the default setting).

Capture Sequence

This feature functions in the same manner as an interval timer.

Initial delay: Controls the amount of time required to elapse ­before the first capture.

Delay: Controls the amount of time required between each capture.

Count: Controls the total number of captures required.

96