Hasselblad 70480522, 70380554 Introduction, Optimize its use see later section for details

H4D

  Introduction

The captured image is temporarily stored internally on a CF card or externally, via a FireWire connection onto a computer hard disk. When tethered to a computer you can control the camera using Phocus (see the separate Phocus manual for further details).

As the H4D is a purely electronic device, attention to power supply is vital. When work- ing untethered it is therefore important to plan battery loading / battery replacement to ensure continued workflow. Likewise, image storage is limited and appropriate steps should also be taken when planning a shoot.

When attaching and removing the sensor unit, pay particular attention to the image sensor area. The sensor itself is covered and protected by a glass IR filter but take great care when handling. If you need to clean the filter, see later section for specific details . When storing separated from the camera, always ensure you have replaced the protective cover.

If you scratch or mark the filter in any way, it will show up on every shot. Replacements are expensive so treat the glass surface with at least as much care as you would a lens. The sensor itself is not accessible for any kind of cleaning or maintenance by a user. Do not attempt any such action as you will almost certainly damage it irreparably. As is the case with all electronic devices pay extra care when working in damp environments­ and avoid damp conditions for storage.

In keeping with Hasselblad’s modular design philosophy, the sensor unit is an independ- ent component of the H4D. In this way it can be used with view/large format cameras to

optimize its use (see later section for details ).

As a result when mounted on an H4D body, user information is spread across the three displays - the sensor unit display, the grip display and the HV viewfinder display. For ­example, exposure controls are visible on the grip display in the viewfinder display and in Phocus when tethered, but not on the sensor unit display Storage information is ­visible on the sensor unit display, but not the grip display. However, there are certain settings­ which are not only visible on both the grip and sensor unit but can also be changed from the grip or sensor unit (note that navigation through the sensor unit menu is either by the zoom controls on the unit or the control wheels on the grip). Please note, therefore, that various tasks are divided and shared.

With untethered use, the management of captures is handled by the unit. Tasks such as storage and rating are therefore visible on the unit display. In tethered use, captures are handled and stored by the computer and are visually checked in Phocus. Check the ­appropriate sections in this user manual and the Phocus user manual for details.

It is advisable to adopt a method that suits you for checking settings before each shoot. It is easy to forget small adjustments you might have made the time before. A checklist would naturally reflect how you normally work but generally, ISO and White ­Balance would probably be at the top followed by browse and file storage. Items such as ­exposure compensation, for example, will appear in the viewfinder and on the grip as a reminder but can be easily overlooked. You might want to consider using the profile function to make a one-button-press resetting of important functions for your particular regular situations.

There are other features such as the visual and audio signals for IAA rating for exam- ple, that you might find invaluable and therefore include them as part of your routine ­settings. All of these issues are covered in the later sections of this manual.

51