Hasselblad 70380554, 70480542, 70480522, 70490533 Setting the options under the user interface menu

H4D

12

34

56

•  Sound:

The H4D uses audio feedback to help let you know if each new image is exposed correctly. This is described in Standard

Instant Approval Workflow.

This menu item has Volume (choose between High, Low and Off), Key Click (choose between On and Off) and Exposure Warning (choose between On and Off).

•  Date & Time:

The H4D has an internal clock that keeps track of the date and time. This information is used to mark each shot with the date and time at which it was taken. It is also used to label batch- es with the date on which each batch was created. (See note

­under ‘General overview of sensor unit’ about keeping the inter-

nal battery charged to maintain Date and Time settings ).

•  Display:

This feature also sets the level of Contrast (on a scale of 1-10) on the display. Usually, you should leave this set to the ­default level of 5; however in some viewing environments and/or with some types of images you may wish to increase or ­decrease this value. A value of 10 provides maximum contrast; a value of 0 provides no contrast (a black screen). You can also help save battery power by using a low value here.

This feature also sets the Brightness (on a scale of 1-10) on the display. This sets the brightness shown on the screen. ­Usually, you should leave this set to the default level of 5, however in some viewing environments and/or with some types of ­images you may wish to increase or decrease this value. A value of 10 provides maximum brightness; a value of 0 provides minimal brightness. You can also help save battery power by using a low value here.

Setting the options under the user interface menu

Each of the above items can be set by similar menu navigation. Language, Power Down and Mark Overex can be set immediately by the + or – button while Sound, Date & Time and Display require another move to sub menu for final choice.

Proceed as follows:

1.Press the menu (MENU) button to open the menu.

2.Use  and  to select the SETTINGS sub-menu.

3.Press  to open the SETTINGS menu.

4.Press  to select the USER INTERFACE sub-menu.

5.Use  and  to select the required item.

Press either the + or – button to make the new settings in the case of Language, Power Down and Mark Overex or press

 again to access Sound, Date & Time and Display.

6.Press the EXIT button again to save the new settings and close the menu.

91