Hasselblad 70480542, 70380554, 70480522, 70490533 Manual Exposure M, Automatic Exposure A, S, P, Pv

H4D

12

EXP

R

3

ISO / WB

Save

4

  Manual Exposure – M

Manual mode will provide total user control of the shutter and aperture settings.

To set the Manual mode, proceed as follows with the camera in active mode:

1)Press the EXP button on the viewfinder.

2)Turn the front control wheel in either direction until you reach M (Manual).

3)Press Save (ISO / WB button) to retain the setting.

In this mode the shutter speed and aperture settings are manually­ chosen by turning the front and rear control wheels.

The standard exposure setting is obtained when the pointer over the exposure scale is positioned above the central index (in the viewfinder display).

Any deviation from this standard setting is displayed by:

•the pointer appearing elsewhere than above the central index and

•by figures above the scale representing the amount of adjust- ment in EVs.

A ‘+ 0.7’ above the scale in the display, as in illustration 4

for example,­ would indicate a ‘0.7 EV overexposure’ setting. ­Conversely, a ‘-2’ , for example, would indicate a ‘2EV under­ exposure’ setting. Note that the appearance of a +/- symbol on the grip and viewfinder displays in manual mode means that a change has been made to the exposure compensation setting.

See later section on Exposure compensation .

The actual aperture settings and shutter speeds are indicated to the right of the exposure scale in the conventional manner. (Note: ‘full-stops’, ‘half-stops’ and ‘third-stops’ are also displayed,

according­ to setting (see ‘increment setting). For example, a ­setting between f/8 and f/11 will appear as f/9,5 if ‘half-stop’ is chosen).

  Automatic Exposure – A, S, P, Pv

Automatic exposure provides a choice of two ways of controlling shutter speed and aperture settings semi-automatically and two ways fully automatically:

Aperture priority:  A - The aperture is manually chosen by you by turning the front control wheel, and the shutter speed is auto- matically chosen by the camera.

Shutter priority:  S  - The shutter speed is manually chosen by you by turning the front control wheel, and the aperture is auto- matically chosen by the camera.

Programmed:  P  - In this mode, an aperture / shutter combi- nation is chosen by the camera according to the EV measured (metering method remains as your choice), though only within pre-set appropriate limitations to suit various requirements and applications.

43