Auto Page RS-622 Enter Valet Mode, Exit Valet Mode, PANIC FUNCTION IF SIREN or HORN IS INSTALLED

Models: RS-622

1 17
Download 17 pages 45.76 Kb
Page 5
Image 5

Enter Valet Mode:

1.From the Unlock condition, turn the ignition to “ON” position.

2.Push and hold valet switch for 2 seconds until the LED turns on. The LED will remain on as long as the system is in ‘valet mode’.

Exit Valet Mode:

1.Return to normal operation, turn ignition ‘on’.

2.Push and hold valet switch for 2 seconds, The LED will turn off indicating the system has exited the valet mode.

PANIC FUNCTION: (IF SIREN or HORN IS INSTALLED)

The transmitter can be used as a remote panic switch to manually trigger the vehicle’s horn in case of emergency.

1.Press and hold the Enter Valet Mode: button for 3 second. The siren will immediately sound.

2.During panic mode, the normal function of this transmitter button

will be suspended. The Exit Valet Mode: and PANIC FUNCTION: (IF SIREN or HORN IS INSTALLED) buttons can be used to lock and unlock the doors (if the option is installed),

3.To stop the panic, press the DOME LIGHT CONVENIENCE DELAY & SUPERVISION button on the transmitter again.

4.If no buttons are pressed, the panic function will stop automatically in 30 seconds.

DOME LIGHT CONVENIENCE DELAY & SUPERVISION

This system has a unique feature, which will turn on your vehicle dome light as follows: (optional) Additional installation required.

1.Upon unlocking, the interior lights will remain on for 30 seconds. Note: Turning on the ignition switch or activating the system will turn off the dome light.

IGNITION CONTROL DOOR LOCKS

If the vehicle’s door locks have been interfaced to the security system, the system will automatically lock the vehicle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”.

TRUNK RELEASE (Additional Installation Required)

Press and hold the IGNITION CONTROL DOOR LOCKS button on transmitter for two seconds to remote control the trunk release or other electric devices.

CAR LOCATOR (ONLY IF SIREN or HORN IS INSTALLED)

Press the TRUNK RELEASE (Additional Installation Required) button twice when the system is armed to active car locator function. The horn will chirp 6 times. The parking light will flash 12 times, for you to easily locate your car.

5

Page 5
Image 5
Auto Page RS-622 manual Enter Valet Mode, Exit Valet Mode, PANIC FUNCTION IF SIREN or HORN IS INSTALLED