1.Press and hold all four remote control buttons simultaneously until one long beep is heard. Programming has now been entered.
2.Within 5 seconds, press the 
button to select the mode of
vibration or melody, the 
icon will displayed on the LCD screen to show the LCD remote transceiver is in vibration mode.
3.To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate programming mode has been exited.
Power Save Mode:
While in the power save mode, the LCD remote transceiver will “sleep” until a button is pushed. This will extend the life of battery. When power save mode is “ON”, the remote control will wake up periodically to check for messages from the security module.
1.Press and hold all four remote control buttons simultaneously unit one long beep is heard. Programming has now been entered.
2.Within 5 seconds, press the 
button to toggle “On” or “Off”. The remote will beep once for “On”, twice for “Off”. When power
save mode is “On”, the 
icon on the LCD screens to indicate entry the “power save mode”
3.To exit programming mode, take no action for five seconds. The remote control will generate two long beeps to indicate programming mode has been exited.
Screen Lamp ON:
Press the 
button once and the LCD screen lamp will turn on for 5 seconds.
Clear the Flash Icon and Melody Sound:
Cycle the ignition then press the 
button first, within 3 seconds press 
and 
buttons at the same time. It will clear the flash icon and melody sound on the LCD screen transceiver.
Stop The Trigger Melody Sound:
While triggering the alarm the LCD screen will alert the user through melody sound and flashing trigger icon. Press any button on the LCD remote transmitter to stop the melody sound.
12
