Auto Page RS-622 Changing The Battery In Your Transmitters, XT-42LCD 2-Way, XT-33, Transceiver

Models: RS-622

1 17
Download 17 pages 45.76 Kb
Page 3
Image 3
CHANGING THE BATTERY IN YOUR TRANSMITTERS

CHANGING THE BATTERY IN YOUR TRANSMITTERS

XT-33:This transmitter uses two (2) 3-volt lithium ion batteries (#CR2016) that are sandwiched together with the (+) side facing upward. To replace the battery, you will need to use a small flat blade screwdriver. Locate the small notch on the lower right side of the transmitter case next to the key ring. Using the flat blade screwdriver, carefully pry the top case from the bottom case. It should snap apart after breaking the seal. Before removing the batteries note the direction of the positive (+) terminal. Place the new batteries in exactly the same manner, being careful not to bend or damage the contact terminal. Snap the cases back together and then test the transmitter to insure it arms and disarms the alarm.

XT-42LCD 2-Way

XT-33

Transceiver

Standard Remote

(2) CR2016

3-Volt Batteries

(1) AAA Battery

ACTIVE LOCK:

1.Press XT-42LCD 2-Way button on the transmitter.

2.The Siren will chirp once and parking lights will flash once indicating that the system is now active. The vehicle doors will lock upon activating only when interfaced with the keyless entry system.

SILENT LOCKING / UNLOCKING: Pressing the XT-33 + Transceiver buttons together on the transmitter will lock or unlock your system, No chirp sound will be heard. Lock / unlock confirmation will be seen through the vehicle’s parking lights only.

ACTIVE UNLOCK:

1.Press Standard Remote button on the transmitter.

2.The horn will chirp twice and parking light will flash twice to indicating that the keyless system is now unlocked. The vehicle doors will

3

Page 3
Image 3
Auto Page RS-622 manual Changing The Battery In Your Transmitters, XT-42LCD 2-Way, XT-33, Transceiver, Standard Remote