REMOTE START OPERATION:
WARNINGS:
As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of.
1.Keep the transmitter out of children’s reach.
2.Do not leave anyone in the vehicle while running on remote control.
3.Alert servicing personnel that the vehicle can be started automatically.
4.Do not start the vehicle by remote while it’s in an enclosed area or garage.
5.Always apply the parking brake and lock the vehicle as you exit the vehicle.
6.Should the unit malfunction, disconnect the fuse until the problem is corrected.
7.The use and operations of this system is the sole responsibility of the operator.
8.Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.
A. TO REMOTE START THE VEHICLE:
When you want to start your vehicle,
1.Press 
button once on the transmitter.
2.The parking lights will flash to indicate the remote start received the signal.
3.The engine will start in approximately 5 seconds.
4.A few seconds after the engine is running, the parking lights will turn on again and climate controls will activate and adjust the vehicles interior temperature to your preset setting.
5.The vehicle will run for a 5 to 30 minute cycle and automatically shut down.
(SAFETY START OPERATION :)
The safety start feature allows you to press the 
button twice before the vehicle will remote start or remote shut down. (Programming Required)
NOTE: The Remote Start Unit will not start the vehicle if any one of the following conditions exists:
1.The hood is opened.
2.The brake pedal is pressed.
3.The optional remote start enable toggle switch is in the OFF position.
4.The gear selector is in any gear other then “PARK” or “NEUTRAL”
TO TURN OFF THE REMOTE START:
When the engine is running (by remote start), if you want to stop it,
1.Press 
button once on the transmitter.
6
