Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1 If necessary, press the |
| button. | |
| |||
Result: | The operation indicator on the indoor unit lights up. | ||
| The air conditioner starts up in the mode selected | ||
| when the unit was last used. | ||
| The indoor unit beeps. | ||
IMPORTANT The air conditioner is tted with a protection mechanism
|
|
| to prevent the unit from being damaged when it is started | ||
|
|
| immediately after being: |
|
|
|
|
| Plugged in |
|
|
|
|
| Stopped |
|
|
|
|
| lt will start up normally after three minutes. |
|
|
|
|
|
|
| |
2 If the | is not displayed at the top of the remote control,press the | ||||
|
| button on the remote control one or more times until it appears. | |||
Result: | The indoor unit beeps each time you press the |
| button. | ||
|
|
| The air conditioner runs in the Dry mode. |
|
|
Note | You can change modes at any time. |
|
| ||
3To adjust the temperature, press the 
button one or more times until the required temperature is displayed.
Possible temperatures are between 16°C and 30°C inclusive.
Result: Each time you press the 
button: - The temperature is adjusted by 1°C - The indoor unit beeps
The air conditioner starts removing the excess humidity; the quantity of air is adjusted automatically.
The fan is running in auto mode.
4 To control the direction of the air flow, refer to pages 15.
E