Samsung UE40J5000AUXRU, UE48J5000AUXRU manual Turning on the TV, Initial Setup, Standby mode

Turning on the TV

Turn on the TV using the P button on the remote control or TV panel. ✎✎ The product colour and shape may vary depending on the model.

✎✎ The TV’s Controller at the bottom right of the TV, lets you control the TV without the remote control.

✎✎ With the TV's Controller, you cannot perform other operations except for turning the TV on or off, changing the channel, adjusting the volume, and switching the input source.

		: Turns the TV on or off.
			: Changes channels.
Press: Move		/
Press & Hold: Select		/	: Adjusts the volume.
	Control Menu

: Displays and selects the available video sources.

Remote control sensor/TV Controller

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Initial Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERP button. Setup is available only when the source is set to TV.

✎✎ If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to Set-top box automatically. If you do not want to select Set-top box, please select Aerial.

If You Want to Reset This Feature...

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default password is "0-0-0-0". If you want to change the PIN number, use the Change PIN function.

You should do Setup (MENU → System) again at home even though you did in shop already.

✎✎ If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on)

English - 6

[UJ5000-40-48-RU]BN68-07425A-00L04.indb 6

2015-09-17 오후 5:12:54