C. Install the Window Slider Kit : Fig 3.
1. Open the window and place the Window Slider Kit on the inside edge of the window.
2. Adjust the Window Slider by adjusting it to the width of the window.
3.Close the window to secure.
4.Tighten the two screws to lock the window slider in palce.
Fig 3.
D. Connecting the Exhaust Hose to the PAC : Fig 4.
1.Connect the hose connector to the air outlet by aligning the tabs on the hose to the PAC and snap it into place.
E. Connect the Exhaust Hose to Window Slider Kit : Fig 5.
1.Move the Portable Air Conditioner within 4 feet of the window.
2.Extend hose to desired length by pulling open.
3.Align the tabs on the hose and the window panel fixture and snap them into place.
ARP-1008 / ARP-1010
Fig 4.
Fig 5.
7