ARP-1008 / ARP-1010
Troubleshooting
Problem | Possible Reasons | |
| - Check and reset the power plug. Wait 3 minutes and try to run the unit again. | |
| - The batteries in the remote may need to be replaced. Replace the batteries and try to run the unit again. | |
Air Conditioner does not operate | - Make sure the plug is properly inserted into the outlet. | |
| - The set temperature may be too close to room temperature. Lower the set temperature. | |
| - The air outlet may be blocked. Check the air outlet and remove any items that may be found. | |
|
| |
| - Check the room for open doors or windows and close them. | |
| - There may be another appliance in the room giving off heat. Check the room and turn off the appliance. | |
Air Conditioner runs but does not cool | - The air filter may be dirty. Check the filter and clean if necessary. | |
| The air exhaust or intake may be blocked. | |
| - The set temperature may be too high. Check the set temperature and reduce it if necessary. | |
|
| |
Air Conditioner does not run | There may be excess water in the unit. Drain the unit. | |
and water full indicator is lit | ||
| ||
|
|
13