Napco Security Technologies XP-400 installation instructions System Times, System Features

Page 13

[08]PGM Output

Enables the PGM Output on a zone trip for each zone selected. The PGM Output will remain ON until reset.

System Times

[10]Exit Delay

The delay time which permits exit through an Exit/Entry Zone [00] after the system is armed, allows a user to leave the premises without setting off an immediate alarm. Exit Delay may be programmed for up to 255 seconds (4¼ minutes); a value of 0 defaults to 60 seconds.

[11]Entry Delay

Delay time permits entry through Exit/Entry Zone(s) after the system is armed without setting off an immediate alarm. Entry Delay allows the user time to enter and disarm the system. Upon entering, the keypad sounder will sound a steady tone (Entry Sound) to remind the user to disarm the system. Entry Delay Time [11] may be programmed for up to 255 seconds (4¼ minutes); a value of 0 defaults to 30 seconds. Entry Delay

may be canceled by pressing a4before or after arming.

[12]Burg (Steady) Output Time-out

Can be programmed from 1 to 255 min (4¼ hours); 0 means output will stay ON until turned off by entering an Arm/Disarm Code.

[13]Reserved

[14]Test Timer Interval

Program the interval, in days, between Test Timer reports. Test Timer Interval may be programmed from 1 to 255 days.

[15]Line Cut Time-to-Fail

Enable this feature by programming the delay time required to declare a line cut failure. Programming 000 will disable line cut detection.

[16]Wireless Supervisory Timer

A transmitter will send a transmission every time it is tripped; when there is no activity, the transmitter sends a supervisory transmission about once an hour. If the receiver does not receive any signal (either

a trip or a status) from a transmitter in the time specified, a system trouble ‘RF Supervisory Failure' will be indicated at the keypad. Timer is programmable from 1-26 hours; 0 means NO supervision.

System Features

[20]Keypad Features 1

(1)Enable Keypad Panic 2 (KK) Additional Programming required:

Select reporting to Telco 1 [36-1] or Telco 3 [56-1].

(2)Enable Keypad AUX (ff)

Additional Programming required:

Select reporting to Telco 1 [36-2] or Telco 3 [56-2].

(3)Enable Keypad Panic (gG) Additional Programming required:

Select reporting to Telco 1 [36-3] or Telco 3 [56-3].

(4)Enable Ambush - If enabled, the 4th User Code will send an Ambush report when entered to disarm the system. Additional Programming required: Program User 4 Arm/ Disarm Code. Select reporting to Telco 1 [36- 2] or Telco 3 [56-2].

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Napco WI1370 1/05 XP-400 Features Table of ContentsGeneral Information Current & Voltage Ratings SpecificationsListings and Approvals Optional AccessoriesEuropean E.M.C. Regulations CE Certification Ordering InformationProgramming the Panel Wiring InstallationPanel Operation Keypad OperationBypassing User Program Mode XP-600 Commands Zone Features Dealer CommandsWireless Operation Signal Strength 06Open Circuit Zones 03Auto-Bypass Reentry Zones02Exit/Entry Follower Zones Hour ProtectionSystem Times System Features22Miscellaneous Features WI1370 XP-400 Installation Instructions 21Keypad Features23Programmable Output Features 24Programmable Output FeaturesPager Programming 33Receiver Options 35Zone Restore Report, Telco34Zone Report, Telco 36System Reporting, TelcoBackup Telephone Programming Report Codes Telephone Number 3 ProgrammingWireless Enhanced Communicator Features66Ambush Report Code 67Telephone Number81 82 Wireless Keyfobs Downloading 92Downloading Features90Callback Telephone Number 91Ring CountDealer Programming Viewing System Troubles System TroublesSystem Trouble Reporting System Troubleshooting Transmitters not responding? How do I remove Keypad Sounder on Alarm?Keypad LEDs Flicker No Keypad Entry Sounder during Entry Time?E1XP-400 Wiring Diagram Napco Limited Warranty
Related manuals
Manual 16 pages 52.12 Kb

XP-400 specifications

Napco Security Technologies has established itself as a leading name in the field of security solutions, and one of its standout products is the XP-400, a cutting-edge alarm panel designed for modern security applications.

The Napco XP-400 is recognized for its robust performance and versatility, making it suitable for both residential and commercial security systems. At the heart of its design is an advanced microprocessor that ensures seamless operation and efficient processing of security signals. This intelligent technology allows for faster response times and greater reliability compared to traditional panels.

One of the main features of the XP-400 is its ability to support a wide array of devices. It can accommodate a variety of sensors, keypads, and other peripherals, enabling users to customize their security systems to meet specific needs. The panel supports both hardwired and wireless devices, providing flexibility in installation and enhancing the overall adaptability of the security system.

Security is further enhanced through the XP-400's integration with Napco's proprietary technologies. The panel features built-in alarm verification, which significantly reduces false alarms by allowing for the confirmation of intrusion events before dispatching emergency services. This feature is critical for maintaining a good relationship with local authorities and ensures efficient utilization of resources.

Moreover, the XP-400 utilizes advanced communication technologies, supporting various forms of connectivity, including phone line, cellular, and internet-based connections. This multi-faceted communication strategy ensures that alerts and notifications are promptly delivered to users and monitoring centers, regardless of the circumstances.

In terms of user interface, the XP-400 is designed with ease of use in mind. The panel includes user-friendly keypads that allow for straightforward operation, programming, and user management. The intuitive layout ensures that even those with limited technical knowledge can navigate and manage their security system effectively.

Another notable characteristic of the XP-400 is its scalability. As security needs evolve, the panel can be expanded with additional zones and features, ensuring long-term viability and protection for its users. This scalability not only extends the life of the investment but also allows for future upgrades in response to changing security technologies and threat landscapes.

In conclusion, the Napco Security Technologies XP-400 stands out as a reliable and versatile security solution. With its advanced microprocessor, comprehensive device support, alarm verification, and flexible communication capabilities, it remains an excellent choice for those looking to enhance their security infrastructure. Its user-friendly design and scalability further solidify its reputation as a top-tier security panel on the market.
Top Page Image Contents