NEC TheaterSync Video Processor user manual Aspect Ratio

MKT-0026-UMN-1.002F				TheaterSync Video Processor User Manual
		OSM Menu Level			Comments
Level 1	Level 2	Level 3	Level 4	Level 5
		Vivid	-	-	Enhances color, expands video
					range signals.
		Dark Scene	-	-	Enhances detail in dark
					scenes, expands video range
					signals.
		Bright Scene	-	-	Enhances detail in bright
					scenes, expands video range
	BCE				signals.
		Graphics3	-	-	Transfers full range input
					signals (0-255) to full range
					output
			Off	-	Turns off Temporal Recursive
					Noise Reduction (TRNR)
			Low	-	Select TRNR -- low bias setting
		TRNR	(default)
			Med	-	Select TRNR -- medium bias
					setting
Advanced
			High	-	Select TRNR -- high bias
	HQV Noise				setting
	Reduction		Off (default)	-	Turns off the Codec Noise
					Reduction
			Low	-	Select Codec Noise Reduction,
					low level
		CNR
			Medium	-	Select Codec Noise Reduction,
					medium level
			High	-	Select Codec Noise Reduction,
					high level
	Split	Off (default)	-	-	Toggles the split screen mode
		On	-	-	Toggles the split screen mode

5.2Aspect Ratio

TheaterSync provides five different aspect ratio treatments. The operation mode of these treatments depends on the aspect ratio of the input channel and the output display.

The TheaterSync assumes that the aspect ratio of input and output is consistent with the industry standard definition of the aspect ratio of the particular input signal and video mode. Output aspect ratio is thus determined by the resolution selected by the user in Setup Mode. Input aspect ratio is determined by the TheaterSync video mode recognition circuitry. Only two output aspect ratios are supported, 4:3 and 16:94.

3Default for DVI and Analog RGB inputs.

4The special case of 1280 x 1024 SXGA (an aspect ratio of 5:4) on output is treated as if it were 4:3. The output of a 1280 x 1024 display will be slightly distorted; circles will appear to be vertically oriented ovals. Since the

Page 30 NEC Solutions, Inc.