Napco Security Technologies GEM-DXK3 manual Programming User Codes, Entering the User Program Mode

Page 22

PROGRAMMING USER CODES

Your Installer has programmed into your system a special User Program Code which can be used to not only Arm and Disarm the system, but also to enter the User Program Mode, where you can program other User Codes. The following explains how you will use this code to program or erase additional User Codes.

Entering the User Program Mode

1Enter your User Code, then press Rto enter the Function Mode.

2Answer NO (press Q) until “17” (Activate Program) is displayed, then press YES (P) .

The display will scroll the following: “P” (Program mode); 4 digits identifying software versions; then “UP” (User Program). The keypad lights will flash while in the User Program Mode.

Programming / Reprogramming a User Code

1Press R, followed by the the 2 digits of the user number to be programmed ( Example: for User 4, enter 04).

2Press R, followed by the new User Code. Note: User Codes may be up to 6 digits in length. For User Codes shorter than 6 digits, use G0for remaining digits.

3Press Rrepeatedly until “UP” is displayed.

4Press Uto save the new User Code. Note: Duplicate Codes are not allowed; therefore a duplicate Code entered in the LCD

Window will erase when Uis pressed. Repeat Steps 1 through 4 for each User Code to be programmed.

Erasing a User Code

To erase a User Code, press R, the 2-digit user number, Rfollowed by G0until “UP” is displayed, then U.

•Example: Erase User 3’s User Code:

Press R03RG0G0G0G0G0G0(“UP” will display) U

Reviewing a Programmed User Code

To review a User Code, press R, the 2-digit user number and Rto step through and review each digit of code.

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents GEM-DXK3 Keypad Introduction Important Test Your System WeeklyTable of Contents Keypad Controls & Indicators Keypad Controls & Indicators Priority Arming Arming AW AY Setting the Alarm When LeavingArming the System Selectively Bypassing ZonesManagers Mode Area Arming OptionalArming Stay Protecting Yourself AT Home Arming in Stay ModeInstant Protection Emergency Buttons Only available if programmed To silence an audible alarm Turning OFF the AL ARM Disarming When ReturningAlarm Indication / Silencing an Alarm Disarming the SystemFire Protection Fire-Zone TroubleFamily Rehearsal Preparing a Fire Escape PlanImportant! Read Carefully Floorplan Limitations of Fire Alarm Warning System Function Menu System troubles. For GEM-P9600/3200 panels only Reset System Trouble? Function Menu Function Menu Communicator Features Central Station MonitoringExit-Delay Restart Advanced FeaturesSecurity Bypass/Unbypass Programming / Reprogramming a User Code Entering the User Program ModeProgramming User Codes Erasing a User CodeExiting the User Program Mode Programming ExampleGlossary Arming/Disarming Turning the system on or off, as followsRF Low Battery Wireless Priority Zone a zone that System Trouble Error Codes Trouble System Trouble Action Indication Condition06-NN 12-NN E19-00 Troubleshooting What do I do if For more infoNapco Limited Warranty Without charge to the original purchaser or user

GEM-DXK3 specifications

Napco Security Technologies has long been a prominent player in the security industry, and its GEM-DXK3 series exemplifies the company's commitment to innovation and user-friendly design. This security control panel is tailored primarily for residential and small business applications, providing a versatile solution to meet the growing demands for safety and surveillance.

One of the standout features of the GEM-DXK3 is its remarkable flexibility in compatibility. The panel supports a wide range of security sensors, including door/window contacts, motion detectors, and glass break detectors. This adaptability allows users to customize their security systems according to specific needs, ensuring comprehensive coverage throughout their property.

The GEM-DXK3 is equipped with advanced technology that enhances its performance and reliability. It uses the latest digital and analog signal processing, which ensures efficient operation and faster response times. This capability minimizes false alarms and provides more accurate alerts when a security breach occurs.

Moreover, the GEM-DXK3 is designed with user convenience in mind. It features an intuitive keypad interface that simplifies programming and operation. Users can easily navigate through settings and adjust their security preferences without hassle. Additionally, an optional LCD touchscreen is available, offering a modern approach to control and monitoring, further enhancing user experience.

Communication is key in security systems, and the GEM-DXK3 excels in this area. It supports multiple communication methods, including landline, internet, and cellular, ensuring that alerts can be sent to users and monitoring stations without interruption. This multi-channel approach provides an extra layer of reliability and security, as users are less likely to miss critical notifications.

The GEM-DXK3 also integrates seamlessly with Napco's mobile app, which allows users to monitor and control their security systems remotely. This functionality is especially beneficial for users who want to keep an eye on their properties while away, providing peace of mind and added convenience.

With its combination of flexibility, advanced technology, user-friendly design, and robust communication capabilities, Napco Security Technologies' GEM-DXK3 stands out as a comprehensive security solution. Whether for home or small business use, this control panel addresses the needs of modern security applications effectively.
Top Page Image Contents