Blower Installation

Blower (SEE LOCATION AND CLEARANCES)

1.Cut and remove the tie securing the blower switch wires to the heat shield.

2.Connect the white wire coming from below the unit to the terminal on the blower.

3.Connect the black blower wire to the black wire coming from below the unit.

4.Insert the clips on the blower housing into the cutouts in the rear shield. Push down to lock the clips into position.

5.Secure the blower using the screw and lock washer sup- plied.

Note: Ensure that all the wires are tucked into the blower

switch housing.

7 79

1 4 4

Switches

6.Open the switch housing by removing the top screw.

7.Install the thermodisc bracket as shown, using 2 of the screws supplied. Connect the ﬂagged leads to the terminals of the thermodisc.

Remove the knock out from the housing label.

8.Install the variable speed switch (rheostat) into the housing with the wires facing up. Secure the switch to the housing using the pal nut and the knob supplied.

9.Connect the male connector on the switch to the female connector coming from the unit.

10.Tuck all of the wires into the housing and close. Secure using the screw removed in step 6.

7 79

NIGHT LIGHT REPLACEMENT

comes equipped with our “Night Light”.

If in the event the lamp or lens needs to be replaced, follow these instructions.

Disconnect the two wire leads at the wire nut. Remove the four screws securing the accent lite assembly from the relief door. Disassemble the lite and the lamp now can be accessed

Note: Do not handle the lamp (bulb) with bare ﬁngers, protect with a clean dry cloth.

The lamp will pull straight out of the socket. Replace with Wolf Steel parts only, as lamp and lens are special “high RAIL temperature” products. When re-installing, ensure integrity of gasket seal.

WIRE NUT

SHEILD

COVER PLATE

GASKET

GLASS LENS

GASKET

RELIEF

DOOR RAIL

THE FIREBOX

MUST BE SEALED.

When re-assembling the light assembly, care must be taken with all gaskets.

“Light Leakage” from above the cast doors may be noticed. The holes in the lamp housing are necessary for ventilation and must not be covered.

W415-0547 / C / 07.25.06

GDS25N, GDS25P specifications

Napoleon Fireplaces has long been renowned for its innovative and high-quality heating solutions, and the GDS25P and GDS25N gas fireplaces are no exception. These models are designed to bring warmth and ambiance to any living space, offering both functionality and style.

The GDS25P, a built-in direct vent gas fireplace, is particularly sought after for its contemporary aesthetics and efficient heating capabilities. With a generous heat output, it can effectively warm large rooms while maintaining a cozy atmosphere. The GDS25N, on the other hand, is the free-standing variant that provides the same impressive heat performance in a stand-alone format, ideal for various room layouts.

One of the standout features of both models is their Clean Face Design. This creates a modern, sleek appearance without the need for bulky trim or surrounds, allowing for a larger viewing area of the dancing flames. The advanced glass viewing area promotes a realistic fire experience, enhancing the visual appeal of any space.

In terms of technology, Napoleon incorporates innovative features such as the Firebox with its patented technology that allows for easy adjustments for optimal flame height. The adjustable flame control ensures that users can customize their experience, enjoying everything from a gentle glow to a roaring fire.

Additionally, both models are equipped with a fan-assisted heat system, which aids in the distribution of warmth throughout the room. This is particularly beneficial during the colder months, as it enhances the overall efficiency of the fireplace.

For safety and convenience, the GDS25P and GDS25N come with an optional remote control system, allowing users to operate the fireplace from across the room. This feature adds an extra layer of comfort, making it easy to adjust settings without needing to get up.

Energy efficiency is another hallmark of these Napoleon fireplaces. They are designed to operate with minimal gas consumption while providing maximum heat output, making them an eco-friendly choice.

With customizable options, including various decorative media like glass or logs, homeowners can personalize their fireplaces to match their interior décor. The GDS25P and GDS25N are not just heating appliances; they are stylish focal points that elevate the ambiance of any home.

In summary, the Napoleon GDS25P and GDS25N gas fireplaces stand out due to their modern design, advanced technology, efficient heating capabilities, and personal customization options. With these models, homeowners can enjoy the warmth and aesthetic appeal of a fireplace without compromising on efficiency or style.