Monessen Hearth DSSPVMB, DSSNVMB Important Safety Information, Installer, Owner

Page 3

IMPORTANT SAFETY INFORMATION

INSTALLER

Please leave these instructions with the owner.

OWNER

Please retain these instructions for future reference.

IMPORTANT

Read these instructions carefully before installing or trying to operate this vent-free gas heater.

WARNING

•Any change to this heater or its controls can be dangerous.

•Improper installation or use of the heater can cause serious injury or death from fire, burns, explosion or carbon monoxide poisoning.

•Do not allow fans to blow directly into the stove. Avoid any drafts that alter burner flame patterns.

•Do not use a blower insert, heat exchanger insert or other accessory, not approved for use with this heater where applicable.

1.Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.

2.Children and adults should be alerted to the hazard of high surface temperature and should stay away to avoid burns or clothing ignition.

3.Young children should be carefully supervised when they are in the same room with the apli- ance.

4.Do not place clothing or other flammable material on or near the appliance.

5.Any safety screen or guard removed for servicing an appliance, must be replaced prior to operating the heater.

6.Installation and repair should be done by a qualified service person.

7.To prevent malfunction and/or sooting, an unvented gas heater should be cleaned before use and at least annually by a professional service person. More frequent cleaning may be required due to exces- sive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air passageways be kept clean.

8.CARBON MONOXIDE POISONING: Early signs of carbon monoxide poisoning are similar to the flu with headaches, dizziness and/or nausea. If you have these signs, obtain fresh air immediately. Have the heater serviced as it may not be operating properly.

9.The installation must conform with local codes or, in the absence of local codes, with the National Fuel Gas

Code, ANSI Z223.l/NFPA54.

10.This unit complies with ANSI Z21.11.2-2001 Unvented Heaters.

11.Do not install heater in a bathroom or bedroom.

12.Correct installation of the ceramic fiber logs, proper location of the heater, and annual cleaning are neces- sary to avoid potential problems with sooting. Sooting, resulting from improper installation or operation, can settle on surfaces outside the fireplace. See log placement instructions for proper installation.

13.Avoid any drafts that alter burner flame patterns. Do not allow fans to blow directly into fireplace. Do not place a blower inside burn area of firebox. Ceiling fans may create drafts that alter burner flame patterns. Sooting and improper burning will occur.

14.Caution: Candles, incense, oil lamps, etc. produce com- bustion by-products including soot. Vent-free appliances will not filter or clean soot produced by these types of products. In addition, the smoke and/or aromatics (scents) may be reburnt in the vent-free appliance which can produce odors. It is recommended to minimize the use of candles, incense, etc. while the vent-free appliance is in operation.

Continued on page 4

46D0550

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Models Dssnvmb Dsspvmb What to do if YOU Smell GASRead and Save These Instructions Contents Important Safety Information InstallerOwner From Cast Iron Stove Product FeaturesWhat YOU will Need for Installation Getting StartedMake Sure YOU have Received ALL Parts Product Specifications Adequate Combustion and Ventilation AIR General Installation InformationStove Dimensions CodesL1 = 151/2 Ft., L2 = 12 Ft., W = 12 Ft., H = 8 Ft Counter Steel StoveCeiling Mantel Side Wall Floor Clearances / Height RequirmentsFlexible Tube Manual Shutoff Gas Supply Inlet Valve Connecting the GASRemote Receiver Checking GAS Pressure and Connecting Remote ReceiverConnecting Remote Receiver Millivolt Control FigureComplete Millivolt System Check Electrical Wiring MILLI-VOLTConnecting Optional Wall Switch or Thermostat Checking System OperationScrews Installing Thermostat Sensor Option Sold SeparatelyKnob Screws Thermo Bulb Wiring Harnesses Stat Sensor Face PlateStat Sensor On/Off Switch Control Knob Optional Blower Operation of Thermostat SensorPlastic Clip Log #4 Log #2 Back Pins Front LOG PlacementChecking Pilot Flame Flame AP PearanceChecking Burner Flame Operating InstructionsHi/Lo Knob Blower Door Operating InstructionsOptional T-Stat Switch Hi/Lo Control Ignitor/Pilot ControlCleaning and Servicing Operating Instructions and Cleaning and ServicingLogs Replacement Parts ListBurner Assembly Replacement PartsDSS Models Observed Problem Possible Cause Remedy TroubleshootingODS/pilot lights, but flame 46D0550 46D0550 Lifetime Warranty Five Year WarrantyBasic Warranty

DSSPVMB, DSSNVMB specifications

Monessen Hearth has established itself as a reliable name in the realm of home heating solutions, providing innovative products that are both functional and aesthetically pleasing. Among its impressive line-up are the DSSNVMB and DSSPVMB models, which are designed to offer homeowners effective and stylish heating options.

The DSSNVMB (Natural Vent) and DSSPVMB (Propane Vent) are part of Monessen's commitment to creating products that look good while delivering exceptional performance. Both models feature a sleek, modern design that allows them to seamlessly fit into various types of home decor. Their visual appeal, combined with practical utility, makes them a popular choice among homeowners.

One of the most significant features of these models is their efficient venting system. The DSSNVMB utilizes natural venting technology, which allows it to expel exhaust gases through an existing chimney, eliminating the need for external venting systems. This feature not only saves on installation costs but also enhances the overall energy efficiency of the unit. In contrast, the DSSPVMB is designed for propane use, boasting a direct venting system that draws air from outside while expelling gases, creating a closed system that maximizes efficiency and safety.

Both models come equipped with advanced burner technology, ensuring an even and controlled flame that optimizes heat output. This means that homeowners can enjoy consistent warmth without fluctuations in performance. The adjustable flame settings allow users to customize their heating experience to meet individual preferences, creating a tailored comfort level.

Moreover, the DSSNVMB and DSSPVMB are designed with user-friendliness in mind. The easy-to-use control systems allow for straightforward operation, making it simple for homeowners to manage their heating needs. Additionally, these models often come with options for remote control, providing convenience in adjusting the temperature from anywhere in the room.

Safety is a top priority in the design of Monessen's products. The DSSNVMB and DSSPVMB are equipped with built-in safety features, including automatic shut-off systems that activate if any irregularities are detected during operation. This reassurance of safety provides peace of mind for users.

In summary, the Monessen Hearth DSSNVMB and DSSPVMB models exemplify modern home heating solutions that combine efficiency, user-friendliness, and design. With their advanced technologies, stylish appearance, and robust safety features, these units are perfect for any homeowner looking to enhance their living space while enjoying the comfort of efficient heating.
Top Page Image Contents