Napoleon Fireplaces NZ25 manual Connection to a Masonry Chimney, If the Chimney, Firebrick Removal

Page 10

10

CONNECTION TO A MASONRY

CHIMNEY

The Napoleon Model NZ25 may be connected to either a lined or unlined masonry chimney.

IF THE CHIMNEY

IS LINED, the flues

must be made of vitri- fied clay and be in sizes of 8" square, 8" x 12", or 8" round with a minimum height of 15 feet above the fire- place. Eight inch round flues are recom- mended. Installation must conform to both national and local code requirements.

FINISHING

FIREBRICK REMOVAL:

The fireplace is shipped with the firebricks in place, how- ever if you need to remove them (ease of installation, re- placement, etc), follow this sequence:

Remove the ashwell grate. This allows the bricks to be removed in the following order--the four bottom bricks, the bricks along the rear wall (pull the two bricks at the centre, forward and lift the bottom of the bricks out first), the side bricks (tilt the top inward).

ATTACHING THE HANDLE:

Attach the handle as shown so that when the door is closed, the handle will be centred in the slot located on the fire- place front. To achieve this you may have to experiment (on the upper and lower screws) with one of the variations shown. Tighten securely.

FIGURE16

IF THE CHIMNEY IS UNLINED, a stainless steel

liner listed to Standard ULC-S640M: Liners for New Ma-

 

sonry Chimneys, may be used to connect the fireplace to

 

the chimney. The liner must be continuous from the fire-

 

place to the chimney cap and be installed only per manu-

 

facturers instructions. Figure 16. In both cases, the chim-

FIGURES18

ney structure must be supported by angle iron anchored

into the masonry walls. Figure 17. The allowable ma-

 

sonry used in chimney construction is 3-1/2" brick, solidly

 

mortared and fully encasing the flue. Ensure there are no

 

leaks.

 

FIGURE17

In no case is the masonry enclosure to be supported by the NZ25 fireplace. Allow a 1" (one inch) air cavity for expansion.

WS-415-71 /09.07.00

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Solid Fuel Burning Zero Clearance Table of Contents Napoleon Wood Fireplace Presidents Lifetime Limited Warranty Conditions and LimitationsGeneral Information IntroductionGeneral Instructions Care of Glass and Plated Parts Four OptionsSee Framing Section Install Ation / FramingLocation and Clearances FramingOutside Combustion AIR Hearth ExtensionMantle Clearances Chimney Installation Installing Flashing and Storm Collar Offset Chimney InstallationAdding Chimney Sections Firebrick Removal Connection to a Masonry ChimneyIf the Chimney Attaching the HandleBlower Install Ation OptionalControlling Combustion AIR NZ25 FeaturesFuel Loading and Burn Cycle ASH Removal Procedures Maintenance ReplacementsReplacement Parts Accessories / OptionsTrouble Shooting

NZ25 specifications

The Napoleon Fireplaces NZ25 is a standout option for those looking to enhance their living space with an elegant and efficient heating solution. This stylish fireplace embodies the perfect blend of cutting-edge technology, aesthetic appeal, and practical functionality.

One of the key features of the NZ25 is its impressive heating capacity. Designed for medium to large living areas, the fireplace is capable of producing a remarkable 20,000 BTUs (British Thermal Units) per hour. This potent output makes it an ideal choice for homeowners seeking to maintain a comfortable atmosphere during colder months.

The NZ25 is built with innovative heating technologies that prioritize efficiency. The fireplace utilizes a high-efficiency design, ensuring that a greater portion of the fuel is converted into heat rather than lost through the chimney. As a result, it not only heats your space more effectively but also reduces fuel consumption, making it an eco-friendly option for conscientious consumers.

Moreover, the NZ25 features Napoleon’s Advanced Airflow System, which ensures optimized heat distribution throughout the room. This technology enhances the fireplace's heating capabilities, allowing for consistent warmth and comfort, regardless of where you're seated in the room. Paired with an array of customizable settings, users can effortlessly control the flame and heat output to suit their specific preferences.

The aesthetic appeal of the NZ25 is another highlight. It offers an attractive contemporary design that complements various interior styles, making it a beautiful focal point in any living area. The fireplace can be customized with an assortment of decorative media, which allows homeowners to personalize the look and feel of their space.

Safety is also a top priority with the NZ25. It features a robust safety screen and has been designed to minimize the risk of accidents. With Napoleon’s commitment to quality, the NZ25 is built to last, ensuring that it remains a reliable heating source for years to come.

In summary, the Napoleon Fireplaces NZ25 combines an impressive heating output with modern efficiency technologies and appealing design. Whether for warmth or aesthetics, this fireplace represents an excellent investment for any home.
Top Page Image Contents