Jwin JX-CD8700 owner manual Remote Control

Antenna connection

You can achieve acceptable reception if you use the supplied FM “pigtail” antenna. If so, the antenna should be elongated and not coiled or bunched up. If it hangs freely, it can be quite effective.

Speaker connection

Insert LEFT spkr’s striped wire into LEFT channel’s SPKR block (30) by pressing the RED lever and inserting the striped wire into the open hole. Do the same with the LEFT speaker’s non-striped wire and the BLACK lever. Repeat for the RIGHT channel SPKR block (29) and the RIGHT speaker’s wire.

AC power connection

Connect the power cable (included in the accessories) first to the power socket (27) at the unit and then insert the power plug into the wall outlet. When you disconnect the plug from a socket, do not pull the cable, always pull the plug.

Note: As soon as the unit has been connected to AC power, parts of the unit are in operation, due to the standby function. To switch off the unit completely, remove the plug from the AC outlet.

Once the unit is plugged in, its time display (3) starts flashing, refer to "Setting the digital clock" on P.11.

32.	POWER Button
33.	Used to turn the system on and off
	0 - 9, +10 NUMERIC Button
	Recalls TUNER preset stations / Recalls CD
34.	tracks
	INTRO Button
35.	Plays the first 10 seconds of each CD track
	RANDOM Button
36.	Randomizes the playback of CD tracks
	PRESET Button
37.	Retrieves preset AM and FM radio stations
	SNOOZE Button
	Turns off the unit for 9 minutes, after which the
38.	unit will then resume its previous function
	PLAY/PAUSE Button
	Initiates CD operation and starts CD playback /
39.	pauses CD playback
	EQ Button
	Selects among “FLAT, POP, ROCK, JAZZ and
	DISCO” as the tonal qualities desired for any

43.	TUNING - SKIP/SEARCH Button
	CD backward title selection / CD backward
	search operation / Manual tuning of stations,
	station search operation
44.	FOLDER DOWN Button
45.	Activates the MP3 folders (in descending order)
	STOP Button
	Stops CD playback / Clears the CD program
46.	memory
	FOLDER UP/STEREO/MONO Button
	Activates the MP3 folder (in ascending order) /
47.	Stereo/mono switching for FM stations
	REPEAT Button
48.	Selects among CD playback repeat functions
	DISPLAY MODE Button
49.	Switching to time display (TIMER ON / OFF)
	DISC 1 - 4 Button
50.	Selects a CD to play from one of the 4 players
	MEMORY/CLK ADJ. Button
	Supplies memory functions for tuner station
	presets, clock setting, and CD programming

REMOTE CONTROL

	32
	55
54	33
	53

	selection
40.	VOLUME + Button
41.	Adjusts to the desired volume (louder)
	TUNING + SKIP/SEARCH Button
	CD forward title selection / CD forward search
	operation / Manual tuning of stations, station
	search operation
42.	VOLUME - Button
	Adjusts to the desired volume (download)

51.	MP3 MODE Button
52.	Selects TITLE or ALBUM(folder) in MP3 mode
	SLEEP Button
53.	Set the automatic switch-off time
	TUNER/BAND Button
	Activates the TUNER and selects the AM, FM,
	or FM/Stereo reception bands
54.	TIMER Button
55.	Activates the timer
	MUTE Button
	Temporarily silences the audio

52

REMOTE CONTROL

51	34
50	35
49
48	36
47
46	37
45	38
44	39

Battery Installation

1.Remove the battery tray by pressing point (1a) inside, then sliding point (1b) area at the same time.

2.Pull out the battery tray.

3.Install or replace the button-type battery “CR2032” (supplied).

4.Close the battery tray.

Note: Pull out insulation tag from the button battery tray before operating the remote control.

40

4341

42

7

3

1b

1a

Warning: Danger of
explosion if battery is
incorrectly replaced.
Replace only with the	2
same or equivalent type.		4

8