Jwin JX-CD8700 owner manual Playing MP3 Discs, Play/Pause, Search

Random play

Press RANDOM on the remote control before or during CD play. The tracks in the CD will be played in random sequence.

To cancel random play, press STOP, or press the RANDOM button again.

Repeat play

Press REPEAT once and the track being played will replay continuously.

The selected number appears on the display. If the CD player is in stop mode, play starts automatically when a track is selected using the numerical buttons.

Search operation

While the CD is in play mode you can scan tracks

by holding down TUNING + SKIP/SEARCH

and TUNING - SKIP/SEARCH. The CD will continue to play until you find the track you want. When you release the button the unit will resume normal play mode.

Track intro-scan

Press INTRO while in stop mode to play the first 10 seconds of each track on all inserted CDs.

Press INTRO again and the selected track plays.

Preset EQ function

5.Press MEM./CLK ADJ. to save the track in the first program location. For example, if you selected CD 1, track number 14, it will appear in Program position 1 as shown.

6.For the next program position, reselect this or another CD and select a track.

7.Confirm the selection using the MEM./CLK ADJ. button.

8.To program other tracks in the memory, repeat steps 3 - 7.

To play the program, press PLAY/PAUSE.

The program can be played back again as long as MEMORY appears on the display.

To clear the programming and resume normal playback

The programming is erased by pressing STOP until the MEMORY display disappears, or by opening the CD changer door. If the unit is switched off, the program is not erased.

Note: REPEAT will not function in programmed play.

NOTE: This unit counts all the folders on an MP3 disc, even if a folder doesn’t contain any MP3 file(s). If you select a folder which doesn’t contain any MP3 file(s), the unit will automatically skip to the next folder until it finds one containing an MP3 file(s).

Press the EQ button (6) or (39) repeatedly to cycle through the preset EQ shown on the LCD display - FLAT, POP, ROCK, JAZZ and DISCO.

PLAYING MP3 DISCS

Press REPEAT twice to have the entire CD played continuously.

Press REPEAT three times to have all the inserted CDs (up to 4) played continuously.

Track selection

Press TUNING + SKIP/SEARCH and TUNING - SKIP/SEARCH to select the desired tracks. The tracks can be selected directly by pressing the corresponding numerical buttons 1 - 0 / +10.

Program memory

The built-in program memory lets you play up to 40 tracks (from up to 4 CDs) in the order of your choice. A track can be stored more than once within the program.

1.Load the CDs.

2.Press MEM./CLK ADJ. (9)/(50) in the stop mode to switch to programming mode.

3.Select a CD by pressing the corresponding DISC 1 - 4 button.

4.Select the desired track using the numerical buttons 0 - 9 / +10 on the remote control or by

repeatedly pressing TUNING + SKIP/

SEARCH and TUNING + SKIP/

SEARCH.

Inserting and ejecting an MP3 disc

The CD compartment (2)/(26) are opened for inserting or removing compact discs by pressing the "OPEN / CLOSE" (15)/(16) buttons.

Insert the MP3 disc with the unlabelled side facing the unit. Press the center of the CD onto the black holder fitted with 3 retaining bearings.

To remove the CD, hold it by the edges and remove it by gently pressing on the black holder.

Then close the disc compartment by pressing the “OPEN / CLOSE” button (15) or (16).

After having closed the disc cover, the CD system begins immediately to scan the content of compact disc inserted. Afterwards, the number of tracks and the play-back time of the compact disc occupying position 1 appear in the display unit (3).

Playing the entire MP3 CD

1.Select the desired CD with the button “CD SELECTION 1 - 4” (5) or “DISC 1 - 4” (49) on the remote. Playback begins automatically.

2.To stop the disc playing, press the “STOP” button (11)/(45)

3.Press the “FOLDER” or button (24)/ (19) or (46)/(44) to select desired MP3 album.

13 14