Vermont Casting 2477 manual Specifications, Model

Dutchwest Non-Catalytic Convection Heater

Specifications

D

G

F

H E

A

C

B

Model 2477

	A	24” (610 mm)
	B	24¹⁄₂” (622 mm)
	C	29³⁄₄” (756 mm)
	D	23” (584 mm)
	E	17¹⁄₂ ” (445 mm)
	F	27” (686 mm) Center of Flue Collar, Rear Exit
	G	30¹⁄₂” (775 mm)
	H	5³⁄₄” (146 mm)
	Log length	19” (483 mm)
	Maximum burn time1	Up to 8 hrs.
	Average area heated (sq. ft.)2	700 - 1400 (65 - 130 m2)
,	Range of heat output4	7,800 - 25,100 Btu/hr.
	Maximum heat output1	35,000 Btu/hr.
	EPA emissions rating4 (g/h, non-catalytic)	1.41
	Weight	400 lbs. (181 kg)
	Loading	Side or front
	Flue exit position (reversible)	Top or rear
	Air control	One
Fig. 1	Dutchwest Convection Heater specifications.

1.Maximum burn times and heat outputs are based on laboratory testing using full loads of seasoned hardwoods, and may vary in individual use depending on how the stove is operated, type and moisture content of fuels, and other factors. Maximum burn times are achieved under different operating conditions than are maximum heat outputs.

2.These values are based on operation in building code-conforming homes under typical Winter climate conditions in the northeastern U.S. If your home is of nonstandard construction (e.g. unusually well-insulated, not insulated, built underground, or if you live in a more severe or more temper- ate climate), these figures may not apply. Since so many variables affect performance, consult your Dutchwest Authorized Dealer to determine realistic expectations for your home.

4. Under specific conditions used during EPA emissions testing.

30002314 3