Vermont Casting 2479 manual Dutchwest Convection Heater Model

Dutchwest Non-Catalytic Convection Heater

Distance from Center of Flue Collar to Wall in Top-Exit Installations

Dutchwest Convection Heater Model 2479

NOTE: These are not clearance distances. These measurements indicate where the centerline of the flue col- lar will be for various installations. Measurements are from the centerline of the flue collar to the wall, not the wall protector.

B A C

C

E D

F

F

ST427

	UNPROTECTED SURFACES			PROTECTED SURFACES
			Corner			Corner
	Parallel Installations		Installations	Parallel Installations		Installations
Chimney Connector	Side	Rear	Corner	Side	Rear	Corner
Listed, Approved	(A) 34¹⁄₂”	(B) 12¹⁄₂”	(C) 21”	(D) 22¹⁄₂”	(E) 12”	(F) 20¹₂”
Double-wall, with	(846 mm)	(318 mm)	(533 mm)	(572 mm)	(305 mm)	(521 mm)
flue collar shield
Single wall, with	(A) 29¹⁄₂”	(B) 12¹⁄₂”	(C) 21”	(D) 22¹⁄₂”	(E) 9¹⁄₂”	(F) 18¹⁄₂”
Connector heat shields	(749 mm)	(318 mm)	(533 mm)	(572 mm)	(241 mm)	(570 mm)
and flue collar shield
Single wall with no	(A) 35¹⁄₂”	(B) 23¹⁄₂”	(C) 30”	(D) 22¹⁄₂”	(E) 17¹⁄₂”	(F) 25”
heat shields	(902 mm)	(967 mm)	(762 mm)	(572 mm)	(445 mm)	(635 mm)

14 30002291