Vermont Casting 2479 manual TWO Weeks

Page 26

Dutchwest Non-Catalytic Convection Heater

um hose inserted into each passage. Care should be taken not to damage the white ﬁbrous material in this rear chamber. (Fig. 34)

The Chimney Connector

TWO WEEKS:

•Inspect the chimney connector and chimney. Clean if necessary.

TWO MONTHS:

•Inspect the chimney and chimney connector. Pay particular attention to the horizontal runs of chimney connector, and the elbows. Clean the system if nec- essary.

ANNUAL SPRING CLEANING:

•Disassemble the chimney connector and take it outdoors for inspection and cleaning. Replace weak sections of connector.

•Inspect the chimney for signs of deterioration. Re- pairs to a masonry chimney should be made by a professional mason. Replace damaged sections of prefabricated chimney. Your local Dutchwest dealer or a chimney sweep can help determine when re- placement is necessary.

•Thoroughly clean the chimney.

Inspect and

Vacuum Both

Rear Corners

ST876

Ash Build-Up

Fig. 34 Inspect and clean out ash accumulation on either side of the non-catalytic combustion system.

26

30002291

Image 26

Contents Non-Catalytic Convection Heater Model Table of Contents Accessories Speciﬁcations ModelMasonry Chimneys InstallationChimney Types Single-Wall Connector Guidelines for Installing the Chimney ConnectorTwo Types of Connector Prefabricated ChimneysSecuring the Connector to a Prefabricated Chimney Double-Wall ConnectorAssembling Single-Wall Chimney Connector Fireplace Installations Above the Fireplace Securing the Connector to a Masonry ChimneyFreestanding Installations Fireplace Installations Through the Fireplace Wall Pass-ThroughsFloor Protection CanadaFireplace Installations ProcedureKeep the Stove a Safe Distance From Surrounding Materials Fireplace Installation ClearancesClearances Safe Ways to Reduce ClearancesDesigning a Safe Installation Clearance Chart Reference DiagramsOnly Corner Parallel Installations Stove Clearance Side Rear3Right Side Front Clearance to CombustiblesCorner Parallel Installations Chimney Connector Side Rear Dutchwest Convection Heater ModelWall Heat Shield Dimensions DutchWest Non-Catalytic Convection Heater Model #2479Attach the Legs and Heat Shield AssemblyUnpack the Parts Fan Kit Installation Heater Controls and Features Air Control OperationLoad Doors Damper Function Successful Wood BurningBurn Only High-Quality Fuel Break-in Fires Use the Air Control Settings That Work Best for YouHow to Build and Maintain a Wood Fire Loading Wood Lighting the Fire Reloading and Reviving the FireRemove Ashes Frequently Safe Ash HandlingAdjust the Door Latch MaintenanceCleaning the Glass Test and Repair the Door GasketsAvoid Damaging the Glass Door Panel Damper AdjustmentPrimary Air Control Adjustment Maintenance Schedule Stove Cleaning the Chimney SystemInspect Regularly, Clean As Required TWO Weeks Draft Management Fuel Draft TestingSingle Venting CreosoteConclusion Dutchwest Convection Heater Dutchwest Convection Heater Limited Lifetime Warranty Months, whichever is longer