Vermont Casting 4030 - 4049 manual Installation & Operating Instructions

Page 3

UVS27 Vent-Free Gas Heater

Installation & Operating Instructions

In order to ensure safe and effective installation, this unit must be installed only by a qualified agency, individual, firm, corporation or company that is experienced in the instal- lation, repair and servicing of this type of appliance and is familiar with the building codes and installation techniques appropriate in your area. Contact your hearth products dealer or local gas supplier for the name of a qualified ser- vice person.

In the Commonwealth of Massachusetts, all gas fittings and installation of this heater shall only be done by a licensed gas fitter or licensed plumber.

IMPORTANT: Read this owner’s manual carefully and completely before trying to assemble, operate, or ser- vice this heater. Improper use of this heater can cause serious injury or death from burns, fire, explosion, electrical shock, and carbon monoxide poisoning.failure to follow instructions may result in property damage, bodily injury or loss of life. This manual contains impor- tant user information. Keep this manual with the heater after installation is complete.

FOR SAFE INSTALLATION AND OPERATION, PLEASE NOTE THE FOLLOWING:

1.Use only Natural Gas with UVS27RN/MN. Use only Propane with UVS27RP/MP. Do not use any other fuels.

2.Install only in accordance with the National Fuel Gas Code, ANSIZ223.1/NFPA54-latest edition. (Ex- ception: Do not derate this appliance for altitude. This appliance has been tested and listed for use in altitudes up to 10,000 feet.)

3.Use only the installation instructions provided by the manufacturer for this appliance. Installation and repair should be done by a qualified installer, preferably NFI or WETT (Canada) certified. The appliance should be inspected before use and at least annually by a professional service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. It is imperative that control compartments, burners and circulating air passageways of the ap- pliance be kept clean.

4.WARNING: Any change to this heater or its con- trols can be dangerous. DO NOT make modifica- tions to any heater or associated parts.

5.DO NOT install this heater in a bedroom or bath- room.

6.Due to high surface temperatures, DO NOT install this heater

•in a recreational vehicle,

•where curtains, furniture, clothing or other flammable objects are less than 36 inches from the front, top or sides of the heater,

•in high traffic areas,

•in windy or drafty areas.

CARBON MONOXIDE POISONING

MAY LEAD TO DEATH!

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning resemble the flu, with headaches, dizziness, or nausea. If you have these signs, the heater may not be working properly. Get fresh air at once! Have the heater serviced. Some people are more affected by carbon monoxide than others. These include pregnant women, people with heart or lung disease or anemia, those under the influence of alcohol, and those at high altitudes.

7.DO NOT place clothing or other flammable mate- rial on or near the appliance.

8.DO NOT obstruct the top grille at all. Doing so will cause high levels of carbon monoxide that will lead to death.

9.This heater needs fresh, outside air ventilation to operate properly. See Fresh Air Requirements on pages 6 and 7.

10.If heater shuts off, heater may not have enough fresh air ventilation. Provide more fresh air. If heater keeps shutting off, refer to Troubleshoot- ing.

11.DO NOT operate this heater

•where flammable liquids or vapors are used or stored

•under dusty conditions.

12.The heater becomes very hot when operating. Alert children and adults to stay away from hot surfaces to avoid burns or clothing ignition. The heater will remain hot for a time after shutdown. Allow surface to cool before touching.

13.Carefully supervise young children when they are in the room with the heater.

14.Do not use the heater if any part has been ex- posed to or under water. Immediately call a quali- fied service technician to inspect the room heater and to replace any part of the control system and any gas control which has been under water.

15.DO NOT operate the heater if any log is broken or damaged.

16.Turn heater off and let cool before servicing. Only a qualified service person should service and repair heater.

17.DO NOT operate this appliance with the safety screen removed. If the safety screen is removed from the appliance for service or cleaning, it must be replaced before operating the heater.

NOTE: If any of the original wire as supplied with the ap- pliance must be replaced, it must be replaced with a wire of at least 105°F temperature rating.

20007068

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents UVS27R, UVS27M Table Of Contents Carbon Monoxide Poisoning MAY Lead to Death Installation & Operating InstructionsUVS27 freestanding shell dimensions Shell DimensionsMantel from Do not install this heater in a bathroom or bed- roomMinimum Clearances to Combustible Materials Hearth RequirementsOdor During Operation Gas SpecificationsGas Inlet and Manifold Pressures High ElevationsUnusually Tight Construction Vent Free FeaturesFresh Air Requirements for Combustion Ventilation Provide For Adequate VentilationExample R N I N GAssembly Procedures Install Optional Fan KitUnpack the Stove Install ON/OFF Switch Glass & Catalyst InstallationThermostat Connection Optional Remove air shutter, turn upside down and replace Install Log Set Connect the Gas Supply LineAged Logs Install rear, left and right logs Complete the InstallationInstall the Top Plate and Grille Your First Fire Flame & Temperature AdjustmentFlame Characteristics OperationLighting and Operating Instructions To Turn Off Gas To HeaterWhat to do if YOU Smell GAS Troubleshooting No spark at pilot when Ignitor is operatedIgnitor Electrode sparks, but Pilot does not light flame goes out while in operation Troubleshooting cont’dPilot lights but Main Burner does not Main Burner shuts off and PilotGlass Replacement MaintenanceFirebox Cleaning and Inspection Cleaning ProcedureReplace the Combustor Module Clean the Combustor ModuleCatalytic Combustor Remove the Combustor ModuleUVS27R, UVS27M Vent Free Gas Heaters UVS27 DescriptionClassic Glass / Catalyst Kit Uvgodcfk Optional Accessories AvailableRemote Controls Fan KitsUVS27 Vent-Free Gas Heater UVS27 Vent-Free Gas Heater Limited Lifetime Warranty CFM Corporation

4030 - 4049 specifications

Vermont Castings is renowned for its commitment to producing high-quality wood and gas stoves, fireplace inserts, and outdoor grills. Among their esteemed lineup, the Vermont Castings 4030 and 4049 models showcase a blend of traditional craftsmanship and modern technology, epitomizing the brand's philosophy of combining functionality with aesthetics.

The Vermont Castings 4030 is particularly celebrated for its efficiency and robust design. One of its standout features is the advanced catalyst system that allows for cleaner burning and reduced emissions. The stove operates with a specially designed catalytic combustor, enhancing the combustion process and increasing overall efficiency. This results in longer burn times and a warmer, cozier atmosphere with less frequent refueling.

The 4049 model builds upon this foundation, delivering enhanced heating capacity suitable for larger spaces. It boasts a high BTU output, ensuring that even expansive areas remain comfortably warm during the coldest months. One of the defining characteristics of the 4049 is its impressive ability to provide a long-lasting heat source, thanks to its large firebox and innovative design.

Both models feature a beautiful cast iron construction, which not only exudes an old-world charm but also allows for superior heat retention. This heavy-duty material ensures that once heated, the stoves radiate warmth over a long period, making them efficient choices for home heating.

A unique feature found in both models is the air wash system. This technology keeps the glass panel clean, allowing homeowners to enjoy the mesmerizing view of the flames without worrying about soot buildup. The stoves are also designed with adjustable airflow controls, giving users the ability to fine-tune the heat output and fuel efficiency according to their preferences.

Aesthetically, the Vermont Castings 4030 and 4049 are designed to complement a variety of home decors, featuring multiple finishes and door styles to suit individual tastes. The craftsmanship extends to decorative features, including embossed designs that add elegance to any room.

In summary, Vermont Castings 4030 and 4049 are exemplary models that embody the brand's dedication to quality. Their advanced technologies, efficient heating systems, and timeless designs make them ideal choices for homeowners seeking both functionality and beauty in their heating solutions. Whether you're looking for a reliable source of warmth or an impressive centerpiece for your living space, these stoves represent an investment in comfort and style.
Top Page Image Contents