Attach rheostat to left side of valve | Vermont Casting 3355, 3340

Snapstat Bracket

Snapstat Module

Pinch

Grommet to

Remove

ST670

Fig. 17 Remove the snapstat and grommet from the bracket and insert the grommet into the inner shroud.

Outer	Slot
Shroud
	Inner Shroud
	Slot
ST194

Fig. 18 Position the fan to engage the inner shroud with the fan bracket slots and secure with sheet metals screws.

8.Route the rheostat wire assembly to the right be- tween the inner and outer shroud. Run the wire through the slots at the bottom right corner of the inner shroud. Some models have the extension wire assembly attached to the inner shroud.

9.Refasten the outer shroud to the inner duct assem- bly.

10.Install the snapstat by loosening the front screw on the inner side of the duct (Fig. 19) slide the snapstat under the head of the screw and tighten. Connect the leads to the snapstat. Make sure the snapstat assembly is mounted straight front to back.

11.Slide shroud assembly over the sides and fasten the four screws loosened earlier.

12.The rheostat control switch attaches to the left side of the valve bracket at the front of the stove. (Fig. 20)

•Remove the plug from the rheostat bracket.

•Insert the switch box shaft through the hole in the back of the right side of the valve bracket, aligning the locator pin with the smaller hole in that bracket.

Radiance Natural Vent Gas Heater

Left Air Duct	Snapstat
Left Air Duct
ST671

Fig. 19 Install the snapstat and connect the extension wire terminals. View is with top removed, however, access is available through the rear when installing fan befoe gas line connection.

Retaining Nut
Control Knob	ST347a
	ST347a
Fig. 20 Attach rheostat to left side of valve.

•Attach the control knob to the rheostat shaft.

•Use the wire tie to secure the fan and rheostat wire harnesses together.

12.Plug the power cord into a standard grounded 110 volt household outlet. If the fan control knob is not turned to the OFF position, the fan will turn on when the temperature at the snapstat reaches approxi- mately 109°F.

MOTOR

BLK	BLK	BLK SNAPSTAT
		BLK SNAPSTAT
WHT	BLK	WHT
WHT	GRN	RHEOSTAT
		ON/OFF
	POWER

ST196

Fig. 21 #2767 / FK26 Fan wiring diagram.

20004409

3356 4409 410, 3340, 3355, 3349 specifications

Vermont Castings offers a diverse lineup of wood stoves designed to provide warmth, efficiency, and aesthetic appeal to any home. Among their impressive models are the 3355, 3340, 3356, 4409, 410, and 3349, each featuring unique characteristics that cater to various heating needs and preferences.

The Vermont Castings 3355 model stands out for its large firebox and high-efficiency design, making it an excellent choice for those seeking extended burn times. This model employs a catalytic combustor that enhances fuel efficiency while minimizing emissions, allowing you to enjoy heat from fewer logs. Its classic design complements traditional and modern aesthetics alike.

The 3340 model emphasizes versatility and functionality. With adjustable airflow controls, users can customize the heat output to suit their needs. A notable feature of this model is its built-in ash pan, simplifying maintenance and cleanup. The durable construction ensures longevity, while the beautiful cast iron exterior makes it a focal point in any room.

For those seeking a more compact option, the 3356 model is an ideal choice. This wood stove features a smaller footprint without sacrificing performance. Designed for smaller spaces, its efficient heating capabilities and elegant detailing provide warmth without overwhelming your living area. It also incorporates Vermont Castings’ advanced clean-burning technology, ensuring reduced emissions and a more sustainable heating solution.

The 4409 model, known for its robust output, is perfect for larger homes or open spaces. Its impressive heating capacity, combined with the brand’s signature craftsmanship, allows for effective warming even in the coldest climates. Furthermore, the 4409 features a unique top-loading design, making it easy to refuel without interrupting the warmth.

The 410 model is a modern take on traditional wood stoves, offering an eye-catching contemporary design that easily integrates into any decor. This model combines cutting-edge technology with user-friendly features, like easy-loading doors and a large viewing window to enjoy the dancing flames.

Lastly, the 3349 is designed for optimal performance with a focus on efficiency and sustainability. This model is equipped with a clean-burning system that significantly reduces particulate emissions, making it eco-friendly. It also boasts a spacious firebox that accommodates larger logs for longer burn times, maximizing heat output while minimizing wood consumption.

In summary, Vermont Castings offers a variety of wood stoves, such as the 3355, 3340, 3356, 4409, 410, and 3349, each with unique features and technologies. Their commitment to performance, efficiency, and elegant design ensures that there is a perfect fit for every heating need, providing both warmth and style for your home.

Fig. 17 Remove the snapstat and grommet from the bracket and insert the grommet into the inner shroud.

Fig. 18 Position the fan to engage the inner shroud with the fan bracket slots and secure with sheet metals screws.

Fig. 19 Install the snapstat and connect the extension wire terminals. View is with top removed, however, access is available through the rear when installing fan befoe gas line connection.

Fig. 20 Attach rheostat to left side of valve.

Fig. 21 #2767 / FK26 Fan wiring diagram.

3356 4409 410, 3340, 3355, 3349 specifications