Injector Orifice Size Matrix | Vermont Casting 3340, 3349, 3355

Radiance Natural Vent Gas Heater

12.Insert blue painted screw when converting to natural gas and red painted screw when converting to LP.

13.Tighten screw (do not over tighten), replace cap.

14.Locate pilot. (Fig. 38)

15.Replace pilot orifice.

•Remove pilot hood by lifting up. (Fig. 41) NOTE: It is not necessary to remove the pilot tube for conver- sion.

Pilot Hood

Pilot

Bracket

CO105a

Fig. 41 Remove pilot hood.

•Remove pilot orifice with allen wrench. (Fig. 42)

•Install the conversion orifice.

•Reinstall pilot hood. Be sure to align hood with index tab.

Index Tab	Allen Wrench
Snap Ring
CO106a

Fig. 42 Remove pilot orifice.

16.Air shutter adjustment. The unit is shipped from the factory with the air shutter open 1”. For LP units only, the air shutter could be closed further. Refer to Table 3 for minimum air shutter opening. The air shutter is located on the bottom of the burner to the left. (Fig.

43)

17.Replace burner. Slide the burner in at an angle with left side lower than the right side. Slide the left side onto the injectors, making sure the burner leg remains at a 90° angle to the base. Lower the right hand side down in to place. Make sure the burner is as far left as possible and the injector shoulders are inside the burner.

NOTE: It is very critical to keep the left burner leg, which holds the injectors, at a 90° angle to the base. (Fig. 39) This keeps the orifices aligned with the tubes inside burner. Failure to do so could affect the flame appearance and performance of the unit.

18.Place conversion label on valve.

19.Reinstall the right and left log bracket assembly. 20.Reinstall the rear log bracket.

21.Replace logs.

22.Replace glass and stove front. Conversion is complete.

Refer to Table 2

Bottom of Burner Pan

ST667

Fig. 43 Adjust air shutter on bottom of heater, Refer to Table 2 for correct position.

Table 2. Injector Orifice Size Matrix

		Conversion to Natural Gas						Input (BTU/h)
Kit #	Front		Part #	Rear		Part #		Minimum	Maximum
000-5009	#51		30000449	#40	20004263		25,000		35,000

			Conversion to LP					Input (BTU/h)
Kit #	Front		Part #	Rear		Part #		Minimum	Maximum
000-5010	#57		20004587	#54		20000130		27,500	35,000

Table 3. Air Shutter Adjustment

Model

RNVOD

Natural Gas	LP
1¹⁄₂”	Fully Closed

Minimum rear injector air inlet openings.

20004409

3356 4409 410, 3340, 3355, 3349 specifications

Vermont Castings offers a diverse lineup of wood stoves designed to provide warmth, efficiency, and aesthetic appeal to any home. Among their impressive models are the 3355, 3340, 3356, 4409, 410, and 3349, each featuring unique characteristics that cater to various heating needs and preferences.

The Vermont Castings 3355 model stands out for its large firebox and high-efficiency design, making it an excellent choice for those seeking extended burn times. This model employs a catalytic combustor that enhances fuel efficiency while minimizing emissions, allowing you to enjoy heat from fewer logs. Its classic design complements traditional and modern aesthetics alike.

The 3340 model emphasizes versatility and functionality. With adjustable airflow controls, users can customize the heat output to suit their needs. A notable feature of this model is its built-in ash pan, simplifying maintenance and cleanup. The durable construction ensures longevity, while the beautiful cast iron exterior makes it a focal point in any room.

For those seeking a more compact option, the 3356 model is an ideal choice. This wood stove features a smaller footprint without sacrificing performance. Designed for smaller spaces, its efficient heating capabilities and elegant detailing provide warmth without overwhelming your living area. It also incorporates Vermont Castings’ advanced clean-burning technology, ensuring reduced emissions and a more sustainable heating solution.

The 4409 model, known for its robust output, is perfect for larger homes or open spaces. Its impressive heating capacity, combined with the brand’s signature craftsmanship, allows for effective warming even in the coldest climates. Furthermore, the 4409 features a unique top-loading design, making it easy to refuel without interrupting the warmth.

The 410 model is a modern take on traditional wood stoves, offering an eye-catching contemporary design that easily integrates into any decor. This model combines cutting-edge technology with user-friendly features, like easy-loading doors and a large viewing window to enjoy the dancing flames.

Lastly, the 3349 is designed for optimal performance with a focus on efficiency and sustainability. This model is equipped with a clean-burning system that significantly reduces particulate emissions, making it eco-friendly. It also boasts a spacious firebox that accommodates larger logs for longer burn times, maximizing heat output while minimizing wood consumption.

In summary, Vermont Castings offers a variety of wood stoves, such as the 3355, 3340, 3356, 4409, 410, and 3349, each with unique features and technologies. Their commitment to performance, efficiency, and elegant design ensures that there is a perfect fit for every heating need, providing both warmth and style for your home.