Vermont Casting 2310 Vigilant II Clearance Chart, All Installations, Allel to Wall, Corners

Vermont Castings Vigilant

Vigilant II Clearance Chart

					Stove Clearance
	Unprotected Surfaces						Protected Surfaces
	Stove Installed Par-			Stove in Corner		Stove Installed Par-			Stove in Corner
	allel to Wall					allel to Wall
	Side	Rear			Corners	Side		Rear		Corners
Single-wall	18”	20”			16”	7”		13”		9”
connector	(457 mm)	(508 mm)			(406 mm)	(178 mm)		(330 mm)		(229 mm)
No heat shields
Single-wall connector										9”
Top exit	18”	13”			16”	7”		11”
Rear and chimney	(457 mm)	(330 mm)			(406 mm)	(178 mm)		(279 mm)		(229 mm)
connector heat
shields 1
Single-wall connector	18”	13”			N/A	7”		11”		N/A
Rear exit,	(457 mm)	(330 mm)				(178 mm)		(279 mm)
Rear heat shield
Double-wall connector	15¹⁄₂”	13”			16”	7”		10¹⁄₂”		9”
Top exit	(394 mm)	(330 mm)			(457 mm)	(178 mm)		(267 mm)		(229 mm)
Rear heat shield
			Chimney Connector Clearance
		All Installations						All Installations
Single-wall connector
No connector heat		17” (432 mm)						9” (229 mm)
shields
Single-wall connector		11” (279 mm)
Connector heat								9” (229 mm)2
shields installed
Double-wall		12” (305 mm)						7” (178 mm)
connector

Clearance to Combustibles in Front of Stove

All Installations

48” (1219 mm)

1.A ceiling heat shield, 24” (610 mm) in diameter and suspended 1” (25 mm) from the ceiling, must surround the chimney con- nector in installations in which the chimney connector penetrates the ceiling. The chimney connector shield extends only to 24” (610 mm) above the flue colllar.

2.The ceiling heat shield required when the chimney connector shields are used should meet the wall protector. This will require trimming the ceiling shield along the line of intersection with the wall protector.

10 2000898