Vermont Casting 410 installation instructions Assembly

Page 15

Madison Woodburning Stove

Assembly

You will need the following tools to assemble the Madi-

son:

 

• 9/16" open end wrench

• safety glasses & gloves

• flat head screwdriver

• power drill w/ 1/8" (3mm) bit

• stub handle phillips screwdriver

Unpack the Stove

1.Remove the shipping straps and plastic wrap.

2.Inspect the stove and contents for shipping damage or missing parts. Immediately notify your dealer of any damage. Do not install this stove if any damage is evident or any parts are missing.

Hardware Bag contents:

•Stove Legs, 4

•3/8-16 x 1¹⁄₄” hex head Leg Bolts with washers, 4

•Owner's Registration Card

•Touch-up Paint (Porcelain enamel stoves only)

Install Stove Legs

Remove and discard the four large slot-head screws from the stove bottom. Install the stove legs using the hex head bolts from the parts bag. Use 3/8” washers with all four legs; the door handle holder installs on the right front leg. Position the holder so the hole to accept the handle hub faces out from the right side of the stove. Tighten the bolts firmly. CAUTION: Overtighten- ing can strip tapped threads.

Leg Bolt and

Washer

Leg Leveller

ST466

Fig. 24 Attach the stove legs with leg levellers.

Install the Bottom Heat Shield

The #1892 Bottom Heat Shield must be used in the U.S. and Canada in any installation on a floor that is not comprised of unpainted cement on earth.

1.Remove the 1/4-20x 1/2" phillips screw from the central mounting boss in the stove bottom. (Fig. 25)

2.Mount the bottom heat shield to the stove bottom using the same phillips head screw previously re- moved. The corners of the shield will butt against the cast leg locators at each corner of the stove bottom.

ST465

1/4-20 x 1/2” Pan Head Screw

 

Fig. 25 Attach the Bottom Heat Shield to the boss in the center of the stove bottom.

Storing the Handle

Use the removable handle to open or close the doors. After using it, remove the handle so it will not get hot. Store the handle in the handle holder installed behind the right front leg. (Fig. 25a)

 

Bottom Heat Shield

 

Door Handle Holder

 

Leg Bolt and Washer

 

ST564

Fig. 25a

Handle holder and heat shield positions.

When Installing Rear Heat Shield

Models 1655, 1656, 1567, 1658, 1659 only.

Remove and retain the factory installed flue collar heat shield. Loosen two phillips screws, on either side of the flue collar, approximately one turn each.Slide heat shield away from the flue collar, then push flue collar forward and retighten phillips screws.

30001453

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Madison Table of Contents AccessoriesIntroduction Madison, Model 1655 Series SpecificationsInstallation ChimneysMasonry Chimneys Chimney Connector Guidelines Prefabricated ChimneysChimney Size Freestanding Installations Double-wall Chimney ConnectorsSingle-wall Chimney Connectors Securing the Single-wall Connector to a Masonry ChimneyConnection Above the Fireplace Wall Pass-throughsRequirements Floor Protection Canadian RequirementsFireplace Hearth Protection Clearance to Surrounding Combustible MaterialsSafe Ways to Reduce Clearances Approved Wall shield construction Wall ShieldsConstruction Requirements Alcove InstallationsStove Clearance Madison 1655 Series Clearance ChartUnprotected Surfaces Protected Madison 1655 Series Clearance DiagramST563 Assembly With Rear Heat Shield Install the Outside Air AdapterBurn Only High-Quality Wood Use the Air Control Setting that Works Best for YouOperation How the Madison WorksStarting and Maintaining a Fire Madison Control SettingsRefuel While the Embers Are Still Hot Ash DisposalSmoke Detectors Care of the Cast Iron Surface MaintenanceAnnual Maintenance Clean the Primary Air OutletChimney System Creosote Flue Sizing Draft ManagementSteel Chimney Inside/Outside LocationNegative Pressure Single VentingFuel BackpuffingMadison Woodburning Stove Madison Woodburning Stove Shell Enamel Parts Madison Model Warranty CFM Specialty Home Products

410 specifications

Vermont Casting 410 is an innovative wood-burning stove that exemplifies the perfect blend of traditional craftsmanship and modern technology. Known for its high efficiency and aesthetic appeal, it offers a reliable heating solution for homes of varying sizes.

One of the main features of the Vermont Casting 410 is its robust construction, made from high-quality cast iron that not only enhances durability but also retains heat effectively. This material ensures that the stove can withstand high temperatures while providing a steady and even heat distribution, making it an ideal choice for homeowners seeking consistent warmth throughout colder months.

The Vermont Casting 410 incorporates advanced combustion technology, which significantly improves its efficiency and lowers emissions. With its CleanBurn technology, this stove generates more heat while consuming less fuel. This results in a longer burn time and minimized wood usage, making it an eco-friendly choice for both the environment and homeowners looking to reduce heating costs.

The versatile design of the Vermont Casting 410 allows it to complement a wide range of interior styles. It features a classic cast iron finish with various color options, enabling users to select a look that suits their home decor. The large viewing window provides a mesmerizing view of the flames, creating a cozy and inviting atmosphere.

Another standout aspect of the Vermont Casting 410 is its easy-to-use features. The stove comes with a simple air control system that allows users to adjust the combustion airflow, optimizing the burn rate based on individual heating needs. This control not only enhances efficiency but also simplifies the operation of the stove, making it user-friendly even for those who are new to wood-burning appliances.

In terms of installation, the Vermont Casting 410 is designed for straightforward setup. It can be connected to existing flue systems, with options for both direct venting and traditional chimney configurations. This flexibility gives homeowners the option to enhance their current heating setup without extensive renovations.

Overall, the Vermont Casting 410 stands out as a reliable, efficient, and stylish wood-burning stove. With its emphasis on quality materials, advanced technology, and user-friendly features, it provides an excellent heating solution while contributing to the comfort and charm of any home. Whether for ambiance or functionality, Vermont Casting 410 exemplifies the essence of modern wood-burning stoves.
Top Page Image Contents