Vermont Casting 1640 Introduction, Table of Contents, Installation Accessories

Page 2

Intrepid 1640 Woodburning Stove

Introduction

Thank you for choosing a Vermont Castings Intrepid to meet your heating needs. We're confident you will find the Intrepid to be an effective wood-burning heater incorporating modern, non-catalytic combustion technology with the classic aesthetic appeal of its Vermont Castings lineage.

The Intrepid achieves high-efficiency through precisely calibrated delivery of primary and secondary air into a refractory-insulated firebox. Properly operated and maintained according to the guidelines in this manual, your Intrepid will provide safe, dependable, and economical heating for years to come.

The Intrepid Model 1640 series has been tested and is listed by the Canadian Standards Association (CSA). The test standards are ANSI/UL-1482 for the United States and ULC S627 and CAN/CSA B366.2 for Canada.

The Intrepid Model 1640 is listed for burning wood fuel only. Do not burn other fuels.

CUS The Intrepid Model 1640 is approved for installation in manufactured (mobile) homes in the United States only using the optional Mobile Home Kit #1881 in accordance with the instructions in that kit

and any local codes.

The Intrepid Model 1640 complies with the standards set forth by the Federal Environmental Protection Agency, 40 CFR Part 60.532(b)(2), as stated on the permanent label attached to each stove.

We recommend that you hire a professional, solid-fuel stove technician to install your Intrepid, or to advise you on the installation should you attempt to install it yourself. Consult the authority having local jurisdiction (such as a municipal building department, fire department, fire prevention bureau, etc.) before installation to determine the need for a building permit. Also, consult your insurance agent to be sure your installation complies with specific requirements that may vary locally.

In addition to directions on installation and operation, this manual includes directions on maintenance and assembly. Please read this entire manual before you install or operate your new room heater.

Save These Instructions For Future Reference.

Proposition 65 Warning: Fuels used in gas, woodburning or oil fired appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

Table of Contents

 

Specifications

3

Installation Requirements

4

Clearances

14

Assembly

16

Operation

18

Maintenance

22

Appendix - Draft Management

25

Parts List

28

Installation Accessories

#1878 Outside Air Kit

#1881 Mobile Home Kit

#0307 Bottom Heat Shield

#0868 Short Legs - Classic Black

#1515 Short Legs - Red

#1512 Short Legs - Sand

#1520 Short Legs - Moonlight Blue

#1510 Short Legs - Green

#0136 Sparkscreen

#0098 Warming Shelf - Classic Black

#1355 Warming Shelf - Red

#1362 Warming Shelf - Sand

#1363 Warming Shelf - Moonlight Blue

#1365 Warming Shelf - Forest Green

2

30000830

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Intrepid Introduction Table of ContentsInstallation Accessories Specifications Intrepid, ModelMasonry Chimneys InstallationChimneys Chimney Size Chimney Connector GuidelinesPrefabricated Chimneys Masonry Chimneys, contdSecuring the Single-wall Connector to a Masonry Chimney Double-wall Chimney ConnectorsSingle-wall Chimney Connectors Freestanding InstallationsRequirements Connection Above the FireplaceWall Pass-throughs Floor Protection Canadian RequirementsMobile Home Installation Fireplace Hearth ProtectionWall Shields Clearance to Surrounding Combustible MaterialsSafe Ways To Reduce Clearances 25mm Fireplace Clearances Mantel Trim Shields Custom-formed mantel shieldAlcove Installations Construction RequirementsIntrepid 1640 Clearance Chart CornerUnprotected Surfaces Protected Surfaces Rear ExitInstall the Bottom Heat Shield AssemblyInstall Stove Legs Unpack the StoveAttach the Chimney Connector Install Smokeshelf / FirebricksInstall the Outside Air Adaptor Flue Collar ReversalHow the Intrepid Works Use the Air Control Setting that Works Best for YouOperation Burn Only High-Quality WoodStarting and Maintaining a Fire Conditioning Your StoveRefuel While the Embers Are Still Hot Ash Disposal Smoke DetectorsMaintenance Adjust the Door Latch Chimney System CreosoteAnnual Maintenance Inside/Outside Location Draft ManagementSteel Chimney Flue SizingFuel Draft TestingSingle Venting BackpuffingNegative Pressure ConclusionIntrepid NC Woodburning Stove Shell Enamel Parts Intrepid NC Model Suede Classic Green Moonlight Sand Red Blue BrownIntrepid 1640 Woodburning Stove Warranty CFM Specialty Home Products

1640 specifications

Vermont Castings has long been synonymous with quality in the realm of wood stoves, and the Vermont Castings 1640 model exemplifies this reputation with its blend of craftsmanship and modern technology. The 1640 is designed to offer an efficient heating solution while delivering an aesthetically pleasing presence in any home.

One of the standout features of the Vermont Castings 1640 is its substantial heat output. Capable of heating spaces up to 2,000 square feet, this model is ideal for larger rooms or open floor plans. It boasts a heating capacity of 60,000 BTUs, ensuring that your living space remains comfortable even during the coldest winters. With a firebox that can accommodate logs up to 18 inches, this stove is designed for convenience, allowing for longer burn times between refueling.

The Vermont Castings 1640 is constructed with robust cast iron, offering durability and excellent heat retention. The cast iron body not only enhances the stove's lifespan but also helps distribute heat uniformly throughout the room. The aesthetic appeal of the Vermont Castings 1640 is augmented by its classic design, which can seamlessly fit into various home styles, from traditional to contemporary.

Equipped with advanced clean-burning technologies, the 1640 excels in efficiency and environmental responsibility. It features a secondary combustion system that maximizes fuel usage and minimizes emissions, resulting in a lower carbon footprint. The air wash system keeps the glass door clean, providing an unobstructed view of the beautiful flames while reducing maintenance efforts.

Another significant benefit is the adjustable air control system, allowing users to easily regulate the fire and heat output. This feature not only enhances user control but also optimizes fuel efficiency, ensuring that you're not wasting resources. The Vermont Castings 1640 also comes with a sleek and easy-to-operate door mechanism that facilitates loading and unloading of logs.

Overall, the Vermont Castings 1640 is an excellent investment for those looking to add both functionality and charm to their home heating options. Its combination of traditional craftsmanship, modern technology, and user-friendly features make it a standout choice for homeowners seeking reliability and aesthetic appeal in their wood-burning stoves. Whether it's the warm ambience or the heating efficiency, the Vermont Castings 1640 is sure to satisfy the needs of any homeowner looking to enjoy the cozy benefits of a wood stove.
Top Page Image Contents