Sunbeam KY-25 user manual Section Installation Instructions, Portable AIR Conditioner Installation

Page 11

SECTION 4

INSTALLATION INSTRUCTIONS

 

 

4.1PORTABLE AIR CONDITIONER INSTALLATION

•Find a proper place for the portable air conditioner. Leave at least 20” (50.8cm) space around the unit (Fig. 8).

When you use the unit as an air conditioner or a dehumidifier, the hot air must be exhausted out of the room to complete the air exchange of the condenser. When the unit is operating on fan, no outdoor air exchange takes place. You do not need to hookup the window kits and hot air exhaust ducts when you use the unit as a fan.

Figure 8

4.2 INSTALLING THE DUCTS IN A WINDOW/SLIDING DOOR

Figure 9

A)Pull out both ends of the hot air exhaust ducts for approximately 6”/15.24cm.

B)Screw the exhaust ducts clockwise with one end to the terminal end of the back of the unit and the other end to the window kit adapter.

C)Mount the terminal end of the exhaust duct to the back of the unit.

D)Open window or sliding door for approximately 5”/12.7cm.

E)Adjust the length of the window kit to the same length of the window or the sliding door. Use all of the panels if necessary. Cut the window piece as needed to fit the length of your window or sliding door. Make sure that the hole on the main piece is not covered by other pieces.

F)Place the window kit in the window or sliding door. Close the window or door as far as it goes.

G)Adjust the length of exhaust duct and affix the window kit adapter onto the holes on the window kit.

NOTE: When using the window kit on a window or sliding door it will cause the window or sliding door to not be properly closed and/or locked. Additional security measurements should

be taken.

10

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Guide D’UTILISATION Table of Contents Save These Instructions for Future Reference Important Safety InstructionsPortable AIR Conditioner Safety Your safety and the safety of others are very importantPlease help us to help you Electrical Shock Hazard Special RecommendationsElectrical Requirements Lcdi Plug Technology US only Recommended Grounding MethodOperating Limits During Cooling Technical SpecificationsUnpacking Your Product Parts Section Tools Needed AccessoriesSection Getting Started Knowing Your Portable AIR Conditioner Power Supply Cord and ReceptacleInstalling the Ducts in a WINDOW/SLIDING Door Section Installation InstructionsPortable AIR Conditioner Installation MANUFACTURER’S Recommendation Installing the Ducts in the WallOn/Off Button Use to Start or Stop the unit LCD Display Panel HOW to SETSOFT-DRY Operation Operating Remote Control Model KY-25Y onlyCooling Operation Auto Operation TIMER-ON Program SettingFAN-ONLY Operation Draining TIMER-OFF Program SettingWater Full Indication and Draining Water Full IndicationWater Full Indication and Draining CONT’D Storage AT the END of the Cooling Season MaintenanceCleaning or Replacing the AIR Filter External Plastic PartsLOW Cooling Efficiency Section TroubleshootingSet the cooling temperature at a proper level Portable AIR Conditioner does not Work AT ALLUnit Turns on and OFF Frequently LOW Cooling CONT’DNoise and Vibration

KY-25, Y specifications

The Sunbeam Y, KY-25 is a remarkable innovation in the realm of aerosol dispensers, specifically designed for efficiency and user convenience in various applications such as household cleaning, personal care, and industrial use. Combining cutting-edge technology with robust features, the KY-25 represents a significant advancement over traditional aerosol spray technologies.

One of the standout features of the Sunbeam Y, KY-25 is its ergonomic design. The dispenser is crafted to fit comfortably in the user's hand, reducing fatigue during prolonged use. The nozzle is designed for precision, allowing users to apply products evenly and accurately. This results in less waste and enhanced effectiveness in delivering sprays or liquid solutions.

The KY-25 incorporates a unique pressure regulation system that ensures consistent output regardless of the angle or orientation during use. This technology prevents drips and sputtering, providing a smooth and uninterrupted spray. As a result, users can achieve optimal coverage with minimal effort, making it an ideal choice for both commercial and domestic applications.

Another significant characteristic of the Sunbeam Y, KY-25 is its versatility. The device is compatible with various formulations, accommodating a wide range of liquids, from cleaning agents to personal care products. Additionally, the KY-25 is designed for ease of refilling, supporting sustainability by reducing single-use aerosol waste. The user-friendly refill process enables quick and hassle-free transitions between different products.

The KY-25 also boasts advanced safety features. Its design incorporates a child-proof locking mechanism to prevent accidental discharges, making it safer for households with young children. Furthermore, the materials used in its construction are resistant to corrosion and degradation, ensuring longevity and reliability in various environments.

In summary, the Sunbeam Y, KY-25 is a pioneering aerosol dispenser that blends ergonomic design, consistent performance, and versatility. With its advanced pressure regulation system, compatibility with multiple formulations, and enhanced safety features, the KY-25 stands out as a leader in its category. Whether for household chores or industrial tasks, it empowers users with a practical solution for efficient aerosol application. This combination of technology and user-centric design makes the Sunbeam Y, KY-25 a must-have for anyone looking to optimize their aerosol dispensing needs.
Top Page Image Contents